KS95B40
Well-Known Fanatic
Should be delivered by Friday. $100 off so $495 + $12 shipping
Fusion Firearms Fusion GI kit
- Thread starter KS95B40
- Start date
Should be delivered by Friday. $100 off so $495 + $12 shipping
Register to hide this ad
fieldgrade
Well-Known Fanatic
I've got a Fusion Reaction. It is a great shooter.
KS95B40
Well-Known Fanatic
Did you build your Reaction from a kit or buy it built?
fieldgrade
Well-Known Fanatic
Bought built. Now that I have it like I want it (different sights, thumb safety, sear spring tweaked, extractor, new grips, and mag well, it is my primary match blaster, and my new DW Valor is back up.
Plus, they don't make a kit for the Reaction (that I am aware of) that is slightly different from the GI.
KS95B40
Well-Known Fanatic
Well, they do now.
https://www.fusionfirearms.com/freedom-series-reaction-build-kit
I am thinking about one of those next... providing this one works out.
Everything but grips and magazine.
https://www.fusionfirearms.com/freedom-series-reaction-build-kit
I am thinking about one of those next... providing this one works out.
Everything but grips and magazine.
fieldgrade
Well-Known Fanatic
I was just on their web page and it wasn't listed. You have mad interwebz skillz, sir.
Edit: Okay, when I clicked through on another link I see it.
Edit: Okay, when I clicked through on another link I see it.
KS95B40
Well-Known Fanatic
It's a good looking pistol!! What changes did you make?
I already have parts to use on my GI kit. A Colt wide spur hammer, small shelf safety and a USGI arched mainspring housing with lanyard loop.
I really like that Reaction!
I already have parts to use on my GI kit. A Colt wide spur hammer, small shelf safety and a USGI arched mainspring housing with lanyard loop.
I really like that Reaction!
KS95B40
Well-Known Fanatic
I meant add that my kit was delivered to my FFL today so I will pick it up tomorrow morning.
fieldgrade
Well-Known Fanatic
As new...
Added Dawson 180 tall x 120w fiber front sight (taller than the one that comes on the Reaction), Ed Brown thumb safety, Wilson Bulletproof extractor (the factory one had to be re-tentioned after 200 rounds, so I upgraded for a mere $30), S&A magwell, and VZ Operator II grips. I should mention that the new S&A billet magwell was going to require a LOT of fitting, so I swapped an older cast S&A magwell out of another 1911 that was pretty much drop in.
Added Dawson 180 tall x 120w fiber front sight (taller than the one that comes on the Reaction), Ed Brown thumb safety, Wilson Bulletproof extractor (the factory one had to be re-tentioned after 200 rounds, so I upgraded for a mere $30), S&A magwell, and VZ Operator II grips. I should mention that the new S&A billet magwell was going to require a LOT of fitting, so I swapped an older cast S&A magwell out of another 1911 that was pretty much drop in.
KS95B40
Well-Known Fanatic
Very nice! I like both before and after
fieldgrade
Well-Known Fanatic
It shot great new. I shoot IDPA every weekend, so I set it up for matches.
KS95B40
Well-Known Fanatic
KS95B40
Well-Known Fanatic
Assembled it today.
Started
Swapped the MSH for one with a lanyard loop.
Started
Swapped the MSH for one with a lanyard loop.
Bender
Well-Known Fanatic
Very cool.........step by step, part by part.
KS95B40
Well-Known Fanatic
Swapped the spur hammer for a wide spur of the same length.
KS95B40
Well-Known Fanatic
I was going to install a small shelf thumb safety but I couldn't get it to function as smooth as the one that came with the kit.
I'll keep working on it.
I'll keep working on it.
Last edited:
KS95B40
Well-Known Fanatic
Frame assembled.
I had a magazine inserted to help keep the sear and disconnector in place while I inserted the pin.
I had a magazine inserted to help keep the sear and disconnector in place while I inserted the pin.
KS95B40
Well-Known Fanatic
Frame is finished. Kit didn't come with grips. These are a set of dark Cocobolo full checkered that I bought from CDNN years ago for $20 +/-.
KS95B40
Well-Known Fanatic
I didn't take pics assembling the slide, not that many parts and went together easily. Only change that I made was swapped out the spring plug. The one with the kit was serrated (never seen that before) and I used a checkered one that I had.
Missed wiping off a little oil on the barrel bushing.
One thing about everything I have ever bought from Fusion, nothing will ever rust before delivery because they must use a quart of oil when they pack stuff up.
Slide to frame fit is snug. Same with barrel bushing. No play at all, didn't need a bushing wrench, I could turn it in place using my thumb but it was tight.
Missed wiping off a little oil on the barrel bushing.
One thing about everything I have ever bought from Fusion, nothing will ever rust before delivery because they must use a quart of oil when they pack stuff up.
Slide to frame fit is snug. Same with barrel bushing. No play at all, didn't need a bushing wrench, I could turn it in place using my thumb but it was tight.
Last edited:
KS95B40
Well-Known Fanatic
All parts fit well. No gaps, spaces, finish is uniform.
