jtischauser
I'm addicted to kicking ass
I am asking $225.
Here are the details from the dillon website. http://www.dillonprecision.com/#/content/p/9/pid/25792/catid/1/BL_550_Basic_Loader
The BL 550 is essentially an RL550B without the automatic priming and powder systems. Capable of loading more than 160 calibers- just like the RL550B- it uses any manufacturers' standard 7/8"-14 reloading dies. It's priced comparably with other manufacturers' turret presses; yet unlike them, it's fully upgradeable to Dillon's Progressive RL550B loader!
 The interchangeable toolhead makes it quick, easy and inexpensive to change calibers. For example, if you load 30-06 for elk, .243 for deer and .22-250 for coyote, you don't even have to change the shellplate. You simply pull two pins and swap the toolhead with your 30-06 dies to another toolhead with your .22-250 or .243 dies in less than 30 seconds! The additional toolheads are $20.95 each, or $18.95 each if you buy three or more- if you load for several rifles it's a no-brainer! Once you get your dies set you'll never have to re-set them.
 A powder measure adapter is available if you want to use a manual measure that you already own. Or, if you want to weigh every powder charge you load, it's easy- you can use a powder trickler with the powder die/ funnel assembly that comes with the BL550.
Here are the details from the dillon website. http://www.dillonprecision.com/#/content/p/9/pid/25792/catid/1/BL_550_Basic_Loader
The BL 550 is essentially an RL550B without the automatic priming and powder systems. Capable of loading more than 160 calibers- just like the RL550B- it uses any manufacturers' standard 7/8"-14 reloading dies. It's priced comparably with other manufacturers' turret presses; yet unlike them, it's fully upgradeable to Dillon's Progressive RL550B loader!
 The interchangeable toolhead makes it quick, easy and inexpensive to change calibers. For example, if you load 30-06 for elk, .243 for deer and .22-250 for coyote, you don't even have to change the shellplate. You simply pull two pins and swap the toolhead with your 30-06 dies to another toolhead with your .22-250 or .243 dies in less than 30 seconds! The additional toolheads are $20.95 each, or $18.95 each if you buy three or more- if you load for several rifles it's a no-brainer! Once you get your dies set you'll never have to re-set them.
 A powder measure adapter is available if you want to use a manual measure that you already own. Or, if you want to weigh every powder charge you load, it's easy- you can use a powder trickler with the powder die/ funnel assembly that comes with the BL550.
