Loads for 9mm

[zombiegirl]

I'm shooting limited minor and was hopin y'all could give me some recommendations on how to load my rounds. I have a Gen 4 Glock 34, will be stepping up to my Gen 4 Glock 35 soon.

Currently have 115g plated extreme bullets
Tight group 4.4 grains
CCI primers

Does this sound ok? I'm trying to get everything tweaked. Had some issues over the weekend and ended up taking the double recoil stock spring out today and put in a zev guide rod and lighter spring--ran a couple hundred rounds through it no issues! Guess my loads were too light for the stock spring. Not sure but she's fine now lol!!

Any suggestions or just let me know what works for you so I can try and see if maybe that's a better combination for me!

Thanks
Guys from BS were awesome this weekend at the OKCGC match and I forgot most of what they told me haha!

I posted this in the reloading section also--moderator remove if I'm in the wrong place! Just thought someone here could help

 

[Wall]

Jamie, you need to bell the case mouth a little by screwing in your powder charging die

 

[zombiegirl]

Tony I got that fixed now i absorbed that lol

 

[Zekernst]

I have found over the time i have been shooting that there is a pretty good chance that if the rounds won't cycle a stock recoil spring, they might not be making minor power factor as well. Just a thought.

 

[MG23]

I shoot my glock 19 with a stock recoil spring for now until I can save the money for the 34 so I don't know if my range data will help you being the barrel is shooter by an inch.

Using the xtreme 115g platted bullets this is my load data and avg chrono data. I am a little over the minor power factor just to be safe.

4.6g Titegroup
Federal small pistol primer
Avg FPS - 1132

4.5g Titegroup
Tula small pistol primer (picked up when I couldn't get primers)
Avg FPS - 1124

 

[RigPig]

I've been playing around with some loads for my Glock 17L. I'm using 124gr plated RN Rainier bullets, 4.0 gr Titegroup, CCI primers. I loaded a batch down to 3.4gr, and it still cycled my 17L and 19. I don't have a chrono yet so I just set the measure at 4.0gr to be safe. My use is just outlaw 3gun, so factors aren't an issue. Ymmv

 

[Robaire Pullicar]

I'm shooting 124 grain bayou bullets, 4 grains tightgroup, cci or remington primers mixed brass shoots really nice I'm my g34 with lonewolf barrel and 11lb recoil spring makes minor easily