Dillon mods

[rchaas]

I got the Inline Fabrication LED, love it.....can see everything now.

 

[bulletman]

I got the LEd kit too... very nice!

 

[CrtsHarris]

Just a tip for the Mr. Bullet feeder(MBF). I use the MBF to load 9mm, 38SPC and recently started loading 380 Auto. While loading 380 Auto, the projectiles would turn and then get stuck in the dropper feed spring and in the top of the dropper assembly of the bullet feeder because they are a shorter length bullet. Fixed the problem by using the 223 dropper feed spring because the spring has a narrower diameter, the projectiles don't turn and get stuck. Also, don't forget to relocate those BB's and clip to the lower slot because of the shorten bullet length.

 

[stan686]

I got the LEd kit too... very nice!

Led grill lights work pretty well too.

View attachment 6725

View attachment 6726

 

[Unionman]

unique tech makes a primer catch upgrade. You can drill a hole in the table and run the primers through. Great upgrade!

 

[bulletman]

Primer upgrade year ago was so worth it

 

[dennishoddy]

Nice rig!

 

[JMorris]

If you drill out the base of a 44 case (mag or SPL) loosen the stock bracket and slide it in and snug the screws, you will have a hose adapter for a 650 for free.

A 38 case can work for an SD.

If you don't mind the cup but want to make sure none bounce out, a sliver of 1/2" box tube welded to the stock bracket works.

 

[technetium-99m]

I just made the ultimate Dillon mod. 1050's are worth it.

 

[JMorris]

There is a lot you can do to a 1050 to make it better too.

Here is a video of my 45 acp 1050 and how the automatic SPP case culler works.

 

[Matt1911]

JMorris is code for MacGuyver.

 

[Fyrtwuck]

After I saw that LED light kit for the 650, I had to get one. Makes a world of difference.

 

[Bob Sanders]

Picked up this light at the LGS. Seen them at the Home Depot as well. Little bit of sticky sided velcro and you're in business.View attachment 7935

 

[mscott327]

Cut a 1/4 coil off the detent ball spring. it smoothes out the indexing on a XL650

 

[rchaas]

Replaced stock shell plate for FFB #5, removes all case wobble, eliminates drag from sloppy tolerances. No more thrown loose powder!


Sent from my iPad using Tapatalk