So, what is your current competition setup...

[jeffsoward]

...and what kind of changes would you like to make (or are planning on making)?

Now, I'm not talking about your dream rig or anything. What are you shooting now and are you planning on changing classes and running another rig.

Right now I'm running a Greyson-built 1911 in SS and I love it, but I'm thinking about moving to limited to gain some rounds.
I figure, I'm at the bottom of SS division, so being at the bottom of Limited won't be much different, just fewer mag changes from here to there.

 

[bsdubois00]

Glock 35 - Dawson mag well, Dawson Sights, and a guy behind the trigger that can't shoot

BUT I HAVE FUN

 

[irons_shooter]

For my pistola, I am running a Triangle 5" STI with an SV tri top slide, lightened on the inside. It's a .40. Wouldn't change a thing, other then my left eye dominance.

 

[Rockon71385]

In production, Glock 34 with a few goodies installed, Warren Tactical Sevigny sights, and a Accurate Iron grip stippling job. CR speed mag pouches and a Ready Tactical DOH holster.

I want to get a 2011 and move to Limited division(who DOESN'T want to go faster?), but it may be a while.

 

[jtischauser]

Production - Accurate Iron G34. I need to get some pics. Mikey smoothed out the trigger for me. Scalloped the grips and blended an internal magwell that is phenomenal. I was practicing reloads on a new gun with out it this past weekend and it hung up every 3rd or 4th reload.

Limited/L10 - Accurate Iron G35. It looks just like this G34 that I use for outlaw 3 gun only the grip is scalloped and it makes .40 holes not 9mm.

Open - Accurate Iron Glock 17

I just bought a Glock 24 to shoot in 3 gun USPSA and Limited and L10. I hope the 6" extra sight radius helps my accuracy

 

[bsdubois00]

Do you have accurate iron underwear also?

 

[jtischauser]

[quote author=B.S. DuBois link=topic=109.msg962#msg962 date=1285191928]
Do you have accurate iron underwear also?
[/quote]

At Accurate Iron we go Commando because we have to!

 

[bsdubois00]

Figured I would add pics...

Limited Gun - Glock 35 - Dawson Magwell - Dawson Sights - some unknown Grip Tape

Production Gun - Glock 17 - OD Green - Dawson Front Sight - Tru Glo Rear Sight

 

[SigPig]

In production I have a Glock 34 with Dawson fiber optics(front and rear) with a little trigger work. Might update a couple of things in the future but it runs just fine for now. In SS a Colt Gold Cup with Bo-Mar sights and briley barrel and bushing set. Runs better than I can shoot it. Plan to run Limited in the future but thats a ways off yet. When that time comes probably be a G35. And I use comp tac holsters.

 

[jtischauser]

[quote author=B.S. DuBois link=topic=109.msg968#msg968 date=1285193742]
Figured I would add pics...

Limited Gun - Glock 35 - Dawson Magwell - Dawson Sights - some unknown Grip Tape

Production Gun - Glock 17 - OD Green - Dawson Front Sight - Tru Glo Rear Sight

[/quote]

You need to get Accurate Iron to stipple this. I used to think grip tape was good enough until Mike finally talked me into teh scallop job. It is awesome and worth every penny!

 

[MattM]

IDPA:
SSP-G17
ESP-G17
CDP-G21
ESR- S&W 625
SSR- S&W M10

USPSA:
Production-G17
Open- Bedell Custom .38SC

 

[MattM]

My Open Blaster.... I'm loving USPSA....

 

[jeffsoward]

[quote author=MattM link=topic=109.msg1810#msg1810 date=1286414257]
My Open Blaster.... I'm loving USPSA....

[/quote]
my God! That thing is freakin SWEET!

Sorry to hear about your ordeal at Nats on Saturday. that was you, wasn't it?

 

[MattM]

No, That was Matt Mink.... we're both Matt M and belong to the same club and we're about 15 miles from each other so we get confused a lot. Well, until people see me shoot then they know there's no way I could be Mink LOL. Yeah, that was a bad deal for Matt, Phil and a few others I was told.

 

[Wall]

wow, that's a helluva blaster

 

[jeffsoward]

[quote author=MattM link=topic=109.msg1822#msg1822 date=1286420082]
No, That was Matt Mink.... we're both Matt M and belong to the same club and we're about 15 miles from each other so we get confused a lot. Well, until people see me shoot then they know there's no way I could be Mink LOL. Yeah, that was a bad deal for Matt, Phil and a few others I was told.
[/quote]
I gotcha.
It was a bad deal. Still glad to have you here and I stole the pic of your open rig so I can spend some alone time.

 

[Chambers]

Production rig:

I'm toying with the idea of a 2011, but the reality is that a good enough shooter could win it all with this little blaster. Trigger is sweet as hell.

I will shoot some lim/lim 10 with my M&P 40 once I get some dies, though, mostly for the hell of it. And to see what major scoring feels like.

 

[Wormydog1724]

Has something been done to the slide?

 

[Chambers]

Tungsten grey 'kote. It's holding up really well. I've drawn it A LOT and it shows just that little bit of wear you see near the muzzle.

 

[Rockon71385]

[quote author=jtischauser link=topic=109.msg1263#msg1263 date=1285791978]
You need to get Accurate Iron to stipple this. I used to think grip tape was good enough until Mike finally talked me into teh scallop job. It is awesome and worth every penny!
[/quote]

+1

Not only does it grip better, but it's PERMANENT! I got sick of the edges on my grip tape pealing up at inconvenient times. Add that to the fact that it takes way too long to get tru-grip, and stippling is hands down the way to go.