Cardplayer64
Fanatic
- Joined
- Sep 25, 2021
- Messages
- 9
Anyone ever notice your barrel hood move ever so slightly when dry firing. ? Mistakenly installed a #4 link when the stock link provided good lockup. Thought I'd see a difference and I sure did. Vertical strings. Immediately knew the problem. No bushing drag or lug issues and plenty of upper lug lockup. Dry fired while looking thru my magnifier and was noticing the barrel hood rise upon the hammer dropping. Immediately changed back to my stock link size and there was zero movement. And for the record there was no barrel movement at all when pressing on the barrel hood in lockup with either link. It only showed the issue during firing or in my case dry firing. Which explained the. low vertical stringing.
Don't recall seeing this quick check for link size before anywhere but that doesn't mean it's not known .But it may serve as a quick check for for correct link size rather than assuming a longer link will provide better lug engagement and better accuracy...
Don't recall seeing this quick check for link size before anywhere but that doesn't mean it's not known .But it may serve as a quick check for for correct link size rather than assuming a longer link will provide better lug engagement and better accuracy...