Hey Guys,
Any help would be appreciated.
Recently my Baer TRS is hanging up on a reload from slide lock with 4 different McCormick 10 rounder magazines. I have never had the slightest issue in the past. The mags look good; no issues to the eye.
I am using white box 230gr ball and the round will porpoise into the barrel. I have tried to give the rear of the slide a decent rap but the slide will not go into battery. The pistol will load the sig 185 & 230 JHP V-Crown from slide lock but it has a very pronounced hesitation right before it goes into full battery. I am the 2nd owner and I have put @ 3000 rounds through it. Everything on the pistol is lubed and cleaned and I have replaced the springs with Wolffe (18.5lb variable, 23lb main, firing pin spring). The white box 230 Ball OAL = 1.26 and the Sig 185 & 230 OAL = 1.22
Any help would be appreciated.
Recently my Baer TRS is hanging up on a reload from slide lock with 4 different McCormick 10 rounder magazines. I have never had the slightest issue in the past. The mags look good; no issues to the eye.
I am using white box 230gr ball and the round will porpoise into the barrel. I have tried to give the rear of the slide a decent rap but the slide will not go into battery. The pistol will load the sig 185 & 230 JHP V-Crown from slide lock but it has a very pronounced hesitation right before it goes into full battery. I am the 2nd owner and I have put @ 3000 rounds through it. Everything on the pistol is lubed and cleaned and I have replaced the springs with Wolffe (18.5lb variable, 23lb main, firing pin spring). The white box 230 Ball OAL = 1.26 and the Sig 185 & 230 OAL = 1.22