Handguard for suppressor

[jtischauser]

I have a AAC SDN-6 on my new .300 BLK rifle. I had one of my favorite Samson Evolution 15" Rails lying around so I threw that on. But it's a little too long and the suppressor is really close to touching the tube. I'm thinking i need something shorter and fatter.

Any suggestions/pics???
Here she is...

 

[Brandon Deem]

What's the OD of the can?

Side note, I personally like the hand guard being super close to the end. As long as u can keep ur hand away from the end [emoji6]
My 10.5, 556.

 

[45recoil]

Yankee hill smooth series has inner diameter of 1.75 i believe. On my 10" bbl i went with a 9"rail so i could remove suppressor if needed.

http://yhm.net/9-200-smooth-series-forearm-midlength.html

 

[jtischauser]

SDN-6 is 1.5" ID.

http://www.advanced-armament.com/762-SDN-6_p_433.html

Those Yahkee Hill Tubes are a good idea!

 

[jtischauser]

I agree the uncircumcised look is where it's at.

This is my recent 8.5" 5.56 build.

 

[brandt9913]

Uh. How do you remove the suppressor without removing the handguard every time? It looks good, but not really practical. The suppressor you chose has a release button at the bottom.

 

[jtischauser]

Uh. How do you remove the suppressor without removing the handguard every time? It looks good, but not really practical. The suppressor you chose has a release button at the bottom.

That's the plan. It takes 5 minutes to remove the Handguard. I don't plan to shoot much ammo through this as all my NFA items are just "look how cool this gun bro" types of guns. So I doubt it gets removed very frequently.

 

[Matt1911]

The Samson handguards are easy to remove. 2 screws then a 1/4 turn and done.

 

[brandt9913]

That's the plan. It takes 5 minutes to remove the Handguard. I don't plan to shoot much ammo through this as all my NFA items are just "look how cool this gun bro" types of guns. So I doubt it gets removed very frequently.

Fair enough. I have the same suppressor and I use it on multiple guns. I have never used a Samson handguard, and did not realize they are that easy to remove.

 

[jtischauser]

The Samson handguards are easy to remove. 2 screws then a 1/4 turn and done.

That's why it's my favorite. Unfortunately it's a bit snug on this can.

 

[Matt1911]

It's not as easy to take off, but the Nordic handguards should give you plenty of clearance for the can.

 

[SGoodwin]

I think it looks good man and I wouldn't change a thing. I'm a fan of the uncircumsized look as well.

 

[Wall]

I'm a fan of the uncircumsized look as well.

??????

 

[SGoodwin]

??????

Autospell won, yet again. I was agreeing with Jesse above lol..

 

[jtischauser]

Thanks to J Carpenter I got the YHM rail and it gives perfect clearance for the AAC SDN6. To my pleasant surprise Optics Planer carried the rail so I saved 10% too. PM me if you need a 10% off discount code. Also sent in a Form 1 so I can get a stick on this bad boy. Time to put some piggies to sleep!

 

[mike cyrwus]

bro, that gun looks cool!