Matt1911
Cyrwus Jr.
Finally!
Sold/Expired 1st Black Dog Machine Magazine Group Buy Status Thread
- Thread starter jtischauser
- Start date
- Status
Robusto
Well-Known Fanatic
Thank you JT, that is good news.
dennishoddy
Moderator
Good news!
David E
Well-Known Fanatic
Jesse, if you come to Edmond, let me know.
I ordered 5 more of these from Joebob, since these:
1). Hold 32
2). Have a thumb assist
3). MAY be phased out in favor of the Gen 4 BDM posted about on ARF com.
Be aware, the 32 rd mags are a full 2" longer than BDM's 26 rd mag, in case that matters to you.
I ordered 5 more of these from Joebob, since these:
1). Hold 32
2). Have a thumb assist
3). MAY be phased out in favor of the Gen 4 BDM posted about on ARF com.
Be aware, the 32 rd mags are a full 2" longer than BDM's 26 rd mag, in case that matters to you.
jtischauser
I'm addicted to kicking ass
I am on my way back from Dallas right now. I'm gonna go to Guthrie and grab my ranger and the mags and head out to okcgc. I'll be out at the club around 4:00.
Feel free to cal me 405-203-2754
Feel free to cal me 405-203-2754
4:00 until what time?
jtischauser
I'm addicted to kicking ass
I meant 5:00 until later
jtischauser
I'm addicted to kicking ass
Damn these mags are long. They look about as long as my 40 round AR15 mags.
dennishoddy
Moderator
Gonna make the Nordic bad-ass looking with those!
JoeBobOutfitters.com
Well-Known Fanatic
Looks like we should be all set. Sorry about the wait guys. We were just as much out of the loop, unfortunately, as everyone else was. Obviously there are some disconnects within Blackdog at times esp with Bruce 
Kevin at Blackdog is the one who does the posts on ARFCOM as far as I know.
We're supposed to have some Gen4 magazine samples coming to us here before too terribly long. I was told there is already a shipping label made for us slotted for the Gen4 mags
Kevin at Blackdog is the one who does the posts on ARFCOM as far as I know.
We're supposed to have some Gen4 magazine samples coming to us here before too terribly long. I was told there is already a shipping label made for us slotted for the Gen4 mags
Matt1911
Cyrwus Jr.
Hey Jesse, would you mind shipping mine if I send a couple bucks your way?
jtischauser
I'm addicted to kicking ass
Could probably do that but I won't be able to get to the post office until the 5th of July.
mike cyrwus
.223
- Joined
- Sep 17, 2010
- Messages
- 4,826
looks like I boogered up the feedlips on the one I got from Jesse today. It ran perfectly the first time I shot it empty, then reloaded it with some minimags and had to seat it firmly in order to latch. Then it was nosedive after nosedive.
Ill have more time to look at it over the weekend, but it looks like the metal feedlips sit higher than the plastic ones, and it can hit the bottom of the nordic bolt.
Like I said, Ill check it out.
Ill have more time to look at it over the weekend, but it looks like the metal feedlips sit higher than the plastic ones, and it can hit the bottom of the nordic bolt.
Like I said, Ill check it out.
jtischauser
I'm addicted to kicking ass
Oh no! They do stand proud and tall. That may be why they are working so hard in gen 4 already.
I picked up mine tonight. I'm liking the looks of them so far. I still need to shoot them to see if they're going to run good or not. I'm running a Nordic upper as well. I hope I don't get carried away and jack up the feed lips like Mike's talking about. Hopefully he can figure out what happened & teach us all to fix them when we screw them up .
.
Matt1911
Cyrwus Jr.
I'll be running them with a CMMG conversion kit so I'll post if I have the same problems with mine when I get em.
JoeBobOutfitters.com
Well-Known Fanatic
Before shipping any of these out we tested them with a LAR Grizzly 22LR sidecharge "terminator" upper. It uses a stainless CMMG bolt. We didn't have the problems described, but also didn't do any major testing. We just function tested them to ensure we could send them out right away.
Joseph
"JoeBob"
JoeBobOutfitters.com
- Status
