andrsnsm
Well-Known Fanatic
I have a Springfield XDm 5.25 chambered in .45ACP, with a PRP Trigger Kit installed and a Patriot Magwell, that I would like to trade.
From the Powder River Precision website about the trigger kit (plus I am including the stock trigger):
"This Drop in Trigger Kit fits all XDM pistols including the new XDM5.25". The kit contains our famous striker safety lever, to remove the long trigger pre-travel on the XDM trigger. Reduced power: trigger spring, sear spring, striker safety spring and striker spring, to lower the pull weight. Our trigger is made of tough light weight polymer that helps speed up the reset. It also has an integral over travel stop on the back of the trigger. Using this method of over travel stop removes added stress on the trigger bar that are present with any of the other over travel stop methods. This trigger is a Springfield Armory OEM part available on production xD and XDM pistols from the factory (see APPENDIX D4 — 21.6 Production Division Rules). When installed correctly, the kit will give you a short crisp trigger pull (about 3.5-4.5lbs) with a fast reset and shorten the total trigger pull length. Fits all XDMs." http://shop.powderriverprecision.net/product.sc?productId=73&categoryId=3
From the Pistol Gear website about the Patriot Magwell:
"PistolGear is proud to offer the first IDPA legal magwell to the XDm marketplace. Tweaking our design for the benefit of an affective product that will fit the IDPA box, this magwell will make your ESP machine rock! The PistolGear "Operator" magwell for the XDm doubles the width of the frame funnel for the benefit of smoother tactical reloads. The magwells locks onto the frame in two locations making it rigid. The magwell is held in place by a threaded pin that replaces the factory grip insert pin, making installation easy and non-permanent. YOU DO NOT EPOXY THIS PRODUCT TO YOUR FRAME.
This set up new would cost you as follows:
Springfield XDm 5.25 out the door price from SSP (pistol, shipping, sales tax) - $754
PRP Drop in Trigger Kit - $125
Patriot Magwell - $85
Total Out The Door would be $954 if buying new, I don't expect that at all.
As for what I am looking for, I would like to trade a nice stainless (would consider other than stainless) 1911 in the "Commander" size. i.e. Colt Commander, Kimber Pro, Springfield Champion, etc... I would also be interested if somebody just happens to have an upper chambered in 300 AAC Blackout but I doubt that will happen. I might consider other offers so just let me know what you have.
Please let me know what you have, you can reach me at [email protected] or you can TEXT me at four zero five five zero one three five five four.
From the Powder River Precision website about the trigger kit (plus I am including the stock trigger):
"This Drop in Trigger Kit fits all XDM pistols including the new XDM5.25". The kit contains our famous striker safety lever, to remove the long trigger pre-travel on the XDM trigger. Reduced power: trigger spring, sear spring, striker safety spring and striker spring, to lower the pull weight. Our trigger is made of tough light weight polymer that helps speed up the reset. It also has an integral over travel stop on the back of the trigger. Using this method of over travel stop removes added stress on the trigger bar that are present with any of the other over travel stop methods. This trigger is a Springfield Armory OEM part available on production xD and XDM pistols from the factory (see APPENDIX D4 — 21.6 Production Division Rules). When installed correctly, the kit will give you a short crisp trigger pull (about 3.5-4.5lbs) with a fast reset and shorten the total trigger pull length. Fits all XDMs." http://shop.powderriverprecision.net/product.sc?productId=73&categoryId=3
From the Pistol Gear website about the Patriot Magwell:
"PistolGear is proud to offer the first IDPA legal magwell to the XDm marketplace. Tweaking our design for the benefit of an affective product that will fit the IDPA box, this magwell will make your ESP machine rock! The PistolGear "Operator" magwell for the XDm doubles the width of the frame funnel for the benefit of smoother tactical reloads. The magwells locks onto the frame in two locations making it rigid. The magwell is held in place by a threaded pin that replaces the factory grip insert pin, making installation easy and non-permanent. YOU DO NOT EPOXY THIS PRODUCT TO YOUR FRAME.
This set up new would cost you as follows:
Springfield XDm 5.25 out the door price from SSP (pistol, shipping, sales tax) - $754
PRP Drop in Trigger Kit - $125
Patriot Magwell - $85
Total Out The Door would be $954 if buying new, I don't expect that at all.
As for what I am looking for, I would like to trade a nice stainless (would consider other than stainless) 1911 in the "Commander" size. i.e. Colt Commander, Kimber Pro, Springfield Champion, etc... I would also be interested if somebody just happens to have an upper chambered in 300 AAC Blackout but I doubt that will happen. I might consider other offers so just let me know what you have.
Please let me know what you have, you can reach me at [email protected] or you can TEXT me at four zero five five zero one three five five four.
