Will adding a nordic extension void my versamax warranty?

bobafett

Active Fanatic
Joined
Jan 2, 2013
Messages
43
Location
Kansas City
Will adding a nordic extension void my versamax warrenty? The factory magazine has those damn dimples in it so I would have to smooth then out with a 5/8 socket. Would smoothing them out void the warranty?

Do we get a discount at nordic, I know they are sponsors on the forum?
 
Register to hide this ad
If you read the fine print I bet putting amo in the gun voids the warranty. If adding a nordic mag tube just like the Versa max tactical has is cause for them not fixing somethign that breaks you shoudl have bought a Benelli.

I am not aware of any discoutn for forum members but it never hurts to ask. They may send you a free spring or something like that.
 
Jesse Tischauser said:
If you read the fine print I bet putting amo in the gun voids the warranty. If adding a nordic mag tube just like the Versa max tactical has is cause for them not fixing somethign that breaks you shoudl have bought a Benelli.

I am not aware of any discoutn for forum members but it never hurts to ask. They may send you a free spring or something like that.
Ok I will give them a call. I hate these damn dimples they put on the tube. I will put a note in my order info and let everyone know what they say.
 
I gave Remington a call and they told me $68 for a versamax tactical mag tube. To remove the factory tube you just need to hit the reciever with a heat gun and use a strap wrench to remove it. Now I am wondering if I could remove it, take it to a local machine shop and have a 1 peice magazine tube made?


They did confirm that it would NOT void the warrenty on the entire gun, just the mag tube. No worries here.

They are sending me out a couple of parts to play with for free.

ordered the bigger bolt handle, bolt button and a lifer for welding
 
bobafett said:
Now I am wondering if I could remove it, take it to a local machine shop and have a 1 peice magazine tube made?
I'd bet a 1 off part like this would be pretty expensive, you'd also need a nut to go over the tube & hold the foream & barrel in place
 
Wall said:
I'd bet a 1 off part like this would be pretty expensive, you'd also need a nut to go over the tube & hold the foream & barrel in place

Damn didnt think of that, well anyway I have a new bolt handle, release button, and carrier (lifter) on the way. 25$ plus 8$ shipping. Just placed an order with Nordic for the rest of the stuff.
 
Jesse Tischauser said:
If you want a one piece tube look up Roth Concept Innovations.
I was going to suggest that but didn't know if they had one for a VersaMax
 
Jesse Tischauser said:
If you want a one piece tube look up Roth Concept Innovations.
Those look about right. Backordered and I am impatient.

Side note called remington back agian and I think I have figured out how to get a ghost ring setup on the versamax. To my knowledge and to remingotons knowledge no one has every done this. might be worth a 100$ experiment
 
Back
Top