Which PCC to buy you ask?

[jtischauser]

I saw this on the Enos forum. It might be worth checking into for the AR Gold trigger. The post is on page 3 of the thread.

http://forums.brianenos.com/index.php?/topic/240342-best-pcc-trigger/&page=3

"I run a ARGold in my JP. It wouldn't always reset when 1st installed. I changed the hammer out with a SRGold hammer and it works perfect now."

I've tried both an AR Gold and an SR Gold in mine to no avail. The cocking line on the JP bolt is just too high a dvthe hammers are just a little too short. I need to get my MIG welder fired up and see what happens.

 

[Burk Cornelius]

Benny's personal 9mm laser!!

posted via Tapatalk

 

[benny hill]

Not to brag, but if your to old to shoot and move anymore, at least you can look good. 10" on a SBR lower.

 

[Wall]

Not to brag, but if your to old to shoot and move anymore, at least you can look good. 10" on a SBR lower.

Or you can do both [emoji4]

 

[charger arms]

Benny's personal 9mm laser!!

posted via Tapatalk

Elite Iron.

I have one of their 375 Cheytac suppressors sitting in the safe. That is a monster but man, it is sexy.

 

[jtischauser]

Spent the past two nights playing with my MPX now that I've got it shootable with a stock, grip, & trigger change. Ordered an ACE ultra lite entry length stock and lancer 10" carbon fiber handguard too.

https://youtu.be/T4rmwrAIDZ8

 

[Wall]

Spent the past two nights playing with my MPX now that I've got it shootable with a stock, grip, & trigger change. Ordered an ACE ultra lite entry length stock and lancer 10" carbon fiber handguard too.

https://youtu.be/T4rmwrAIDZ8

Lol, you're going to have as much $ in that thing as your infinity pistols

 

[jtischauser]

Lol, you're going to have as much $ in that thing as your infinity pistols

I'm around $2500 on both this gun and my reconfigured JP. After I get the SBR barrel, stamp and can this one will be pushing $3000.

 

[Professor]

Spent the past two nights playing with my MPX now that I've got it shootable with a stock, grip, & trigger change. Ordered an ACE ultra lite entry length stock and lancer 10" carbon fiber handguard too.

I need to bring my 4.5" MPX SBR up so you can shoot it and compare the results. The 10" Lancer might be perfect with it.

 

[Bryan Hoover]

I'm around $2500 on both this gun and my reconfigured JP. After I get the SBR barrel, stamp and can this one will be pushing $3000.

I hear you can get a badass Nordic for $1600

 

[Wall]

I hear you can get a badass Nordic for $1600

He's only got that much in the jp because he bought a complete rifle then replaced all the parts. Had he started with a receiver set, he'd be into it for a little over half

 

[jtischauser]

I need to bring my 4.5" MPX SBR up so you can shoot it and compare the results. The 10" Lancer might be perfect with it.

I ordered a 4.5" barrel too. It will look great with the 10".

 

[jtischauser]

He's only got that much in the jp because he bought a complete rifle then replaced all the parts. Had he started with a receiver set, he'd be into it for a little over half

This is true. Upon completion both guns will only have the factory receivers, bolts, and spring/buffers remaining.

 

[Wall]

This is true. Upon completion both guns will only have the factory receivers, bolts, and spring/buffers remaining.

Not the jp barrel?

The difference is you can't get just a receiver set for the mpx to build it the way you want. You can only buy a whole gun & strip it.

 

[Professor]

I ordered a 4.5" barrel too. It will look great with the 10".

Did you order an OEM barrel assembly or one of the aftermarket barrels that getting ready to be released?

 

[jtischauser]

Not the jp barrel?

The difference is you can't get just a receiver set for the mpx to build it the way you want. You can only buy a whole gun & strip it.

You are correct! I'll probably get another SBR upper for he JP too.

 

[jtischauser]

Did you order an OEM barrel assembly or one of the aftermarket barrels that getting ready to be released?

I ordered one of these. $600 for a Sig barrel and piston is retarded.

 

[PeteMcGuire1881]

So, if a guy was going to build one from scratch, how would your detailed list of components read?


Sent from my iPhone using Tapatalk

 

[Wall]

So, if a guy was going to build one from scratch, how would your detailed list of components read?


Sent from my iPhone using Tapatalk

QC10 receivers
JP barrel & comp
JP bolt
JP fire control group with ambi safety
Kns anti-roll pins
Ergo grip
Raptor ambi charging handle
Odin works extended mag release
Phase5 1 piece BAD bolt release
Handguard & stock of choice
CMORE 2 or 4 MOA railway optic

 

[Matt1911]

I ordered one of these. $600 for a Sig barrel and piston is retarded.

Holy crap! That right there tells me I will never get an MPX. That's stupid expensive for no real reason.
You could get a new pistol for that.