USPSA AT H&H 12-27-15 Sunday

Feegee · Dec 22, 2015

H&H USPSA Match

We will have our monthly match this Sunday at H&H. Sign in starts around 5:30, and shooting will begin as soon as the range is clear, and the stages are set. Please come out and help set up stages... Please remember we need help cleaning up after the match.
Thanks,
Feegee

Remember for every 10 shooters will be giving out a $50 gift card

jtischauser · Dec 22, 2015

I need to shoot!

Feegee · Dec 23, 2015

Jesse Tischauser said:
I need to shoot!

You need to come up and let me school you. We could even bet dinner on it plus you don't come up here much any more.
I will even pay your match fee

Feegee · Dec 23, 2015

Let me know who all are thinking about shooting.

Feegee · Dec 23, 2015

Wall · Dec 23, 2015

I'll probably be there

Josh Smash · Dec 23, 2015

I plan to be there.

Feegee · Dec 23, 2015

We are in the process of freshening up the match. Building new props, and some other things. I also bought a door that we can open and it will activate swingers or whatever else we want to do, and lots of other things are coming in the future. You can only do so much with the size and restrictions of the facility that we have, but we have come up with some really good ideas. So stay tuned for new and exciting things in the future. I will create a thread for anyone who would like to add some input/ideas, and we will discuss them.

jtischauser · Dec 23, 2015

Feegee Matlock said:
We are in the process of freshening up the match. Building new props, and some other things. I also bought a door that we can open and it will activate swingers or whatever else we want to do, and lots of other things are coming in the future. You can only do so much with the size and restrictions of the facility that we have, but we have come up with some really good ideas. So stay tuned for new and exciting things in the future. I will create a thread for anyone who would like to add some input/ideas, and we will discuss them.

You need some Bullet traps so you csn shoot point blank and 180-to-180.

Watch those indoor Russian IPSC videos. That's the pinnacle of indoor action pistol matches.

Feegee · Dec 23, 2015

That is one thing I am working on. Use some of your connections to get me started The right direction. I have some we are going to test out at practice.

jtischauser · Dec 23, 2015

Feegee Matlock said:
That is one thing I am working on. Use some of your connections to get me started The right direction. I have some we are going to test out at practice.

I don't know much about all that. I know MGM makes some but that's as far as my knowledge goes

Feegee · Dec 23, 2015

Jesse Tischauser said:
I don't know much about all that. I know MGM makes some but that's as far as my knowledge goes

I will call you one day next week and talk to you.

Glock_21 · Dec 23, 2015

Feegee Matlock said:
Let me know who all are thinking about shooting.

All of the Christmas get-to-gethers should be done by Sunday. I'm hoping to make it down.

drmitchgibson · Dec 24, 2015

Feegee Matlock said:
That is one thing I am working on. Use some of your connections to get me started The right direction. I have some we are going to test out at practice.

There are plenty of vids on Enos and certain higher level shooters post on Facebook of badass indoor matches with full 180 degrees of freedom. I'll go over there and find out for us.

drmitchgibson · Dec 24, 2015

Apparently some other ranges use AR500 steel for barrier walls instead of concrete, and the steel is covered with plywood, and then ballistic rubber or nylon goes over that. The polymer traps the bullet fragments.

Feegee · Dec 25, 2015

Hmm I will look into it and see how cost effective it will be

axel1841 · Dec 25, 2015

I was talking to Zeke about this the other day, what about making the steel targets out of 1/4" aluminum? You wouldn't have to worry about ricochets and it would sound better then those plastic targets. And it's probably cheaper.

Sent from my iPhone using Tapatalk

drmitchgibson · Dec 26, 2015

Feegee Matlock said:
Hmm I will look into it and see how cost effective it will be

It won't be. Not even worth looking into.

But if you got some 1/4" AR500 about 36"x36" then you could make stands for it and cover the plate in ballistic nylon, and then you could place them anywhere and have many, many more stage design possibilities. Replace the ballistic nylon annually, and the AR500 about once every never.