Sold/Expired Tripp Research Inc. 1911 Cobra Magazines

Status
Not open for further replies.
Name, (Qty), PartNo.
Robusto (2) 8R-45-RG-BPA (+ $8.50 each)
Robusto (1) 10R-45-RG
Stan686 (2) 8R-45-RG
Stan686 (2) 10R-45-RG
TroyF (2) 9R-40SW-RG
Brian Koenke (3) 8R-45-RG
Brian Koenke (1) 7R-45-RO
Dennishoddy (2) 10R-45-R-G
Squinty (2) 8R-45-RG
Squinty (2) 10R-45-RG
Wall (2) 7R-45-RO
Squinty (2) 10R-45-RG

Total Qty: 23

7R-45-RO - 3
8R-45-RG - 7
8R-45-RG-BPA - 2
10R-45-RG - 9
9R-40SW-RG - 2
 
PMs sent to all in the group buy. Please check your order to make sure we have the correct part number, quantity and dollar amount for you. I am trusting you to confirm that information is correct.
You can check your 1911 to make sure you are needing Officer Model (2 5/8") or Government Model (3 1/8") by measuring the distance between grip screws.

Please contact Brian or me about payment and delivery.
Thank you, Dan
 
Podman said:
I would take 2 of the 7R-45-WG if someone in the Tulsa area would pick them up so I wouldn't have to go to OKC.
Click to expand...


If you want in on this you need to PM Robusto ASAP. I think he is placing the order today or tomorrow. Shipping from OKC to Tulsa shouldnt be much extra
 
Order placed with Tripp. There was a run on the Officer Model of mags causing a 4 week delay (Sorry Wall). The 10 rd mags are about 1 week out. The remainder of the 8 and 9 rd mags have been shipped.
-Dan
 
The 8R-45-RGs and "my little pony" mags are in and out for delivery.
We can expect the 10R-45-RGs in about a week.
Because of a rush on the Officer model we are expecting a delay.
 
We should be getting our 10R mags next week. And we will receive an update on the Officer mags at that time. -Dan
 
I'm just going to throw this out there... I tuned several of these mags recently for a fellow shooter. His mags were 9mm with the feed lips a bit out of spec. All of his mags were at .320" from the back of the feed lips to the front. They should be .350" - .355" at the back and .003" - .005" wider in the front. Before this adjustment he was having some feed issues and after thigns ran like a champ. He shot the last classifier match at USSA in two divisions with no issues. If after you guys get these mags, you experience and tuning issues with them I am happy to help out.
 
The 8R-45 looks to be very high quality. I think the follower bushing is the key to it's performance. I will take Tripp mag with me on the next visit to the range. I loaned one out to a buddy to try out as well. -Dan
 
Do yourselves a favor, take Rusty's advice to measure the mags & verify they're in spec. This should be done with any new mag you get.
 
Wall said:
Do yourselves a favor, take Rusty's advice to measure the mags & verify they're in spec. This should be done with any new mag you get.
Click to expand...
I guess mine are all in spec, as I've never had a problem, but that was very good information. ;) I have a journal of things to check, etc that I keep. The info Rusty gave will go into it. Thanks! :D

Off topic a little, but I have an AMT automag in .22 mag that has a loading problem. I'm pretty sure its the mag. Where would one get specs for proper dimensions?
 
Status
Not open for further replies.

Latest posts

Random media

IMG_2330.JPG
20180805_113634.jpg
2E6C0A45-2646-429B-94AC-4FFD72714B5C.jpeg
removal.JPG
003.JPG
IMG_20190425_175835628.jpg
20220218_123407.jpg
Back
Top