Torch Red Tulsan
Fanatic
Well, I hate to do this, but I've had to evaluate priorities and this one didn't make the cut. I'm going to start right off by stating the issues I've had recently. I bought this used from a Dr in OKC and it ran great for about a year (Though I don't shoot as activly as most of you on here). I restocked with bulk ammo last summer and that's when my issues started. I would failure to return to battery and light strikes every few magazines. I sent it off to Mike Cyrwus last month and he did his Reliability Tuning Packing to it along with a few small things. He test fired 50 rounds and had no malfunctions, but I'm still having the same problems. That leads me to think that the problem is either the ammo or the shooter... Unfortunately, I don't have the time or inclination to try different ammo and take them out to the range each time. A long intro, but I wanted to be upfront with what's going on with the gun.
Now for the ad:
I bought this used a few years ago and am unsure of the round count, but I've put less than 500 through it since I bought it. After spending some time at the range with Ryan Muller and Di Liedorff this spring, I realized that I'm not going to get into 3-Gun, so I don't have a need for this nice of a gun. I have the gun with original mag, I also bought 3 addition STI mags for a total of 4. Mike installed a Dawson Precision fiber optic front sight and I have the additional red and green from the packaging. Below is a list of most of the items Mike did last month. I can provide the full description from his invoice if someone wants it.
Reliability Tuning Packing (check & polish breechface, tune extractor & ejector, check barrel timing, inspect upper lugs for peening,bevel firing pin hole, check & polish frame ramp & barrel throat, bevel & lap frame rails, ream & polish chamber for proper headspace)
ISMI 17# MS
Replaced recoil assembly
STI Guide Rod
11# ISMI Spring
Asking $1600 - FTF in the Tulsa area. I don't get down to OKC often, but could try to work something out at a match if Di and/or Ryan are attending.
Only trades I would be interested in would be towards a Gibson ES semi-hollow body
Now for the ad:
I bought this used a few years ago and am unsure of the round count, but I've put less than 500 through it since I bought it. After spending some time at the range with Ryan Muller and Di Liedorff this spring, I realized that I'm not going to get into 3-Gun, so I don't have a need for this nice of a gun. I have the gun with original mag, I also bought 3 addition STI mags for a total of 4. Mike installed a Dawson Precision fiber optic front sight and I have the additional red and green from the packaging. Below is a list of most of the items Mike did last month. I can provide the full description from his invoice if someone wants it.
Reliability Tuning Packing (check & polish breechface, tune extractor & ejector, check barrel timing, inspect upper lugs for peening,bevel firing pin hole, check & polish frame ramp & barrel throat, bevel & lap frame rails, ream & polish chamber for proper headspace)
ISMI 17# MS
Replaced recoil assembly
STI Guide Rod
11# ISMI Spring
Asking $1600 - FTF in the Tulsa area. I don't get down to OKC often, but could try to work something out at a match if Di and/or Ryan are attending.
Only trades I would be interested in would be towards a Gibson ES semi-hollow body
