shell latch springs on versamax

[bulletman]

Should I run both springs on my shell latch on my versamax? If I do the one, which one do I use? Thanks -chris

 

[James Peel]

Yes, run both springs. But there's a mod you can do to the latch that helps it load tremendously easier. Not deepening the "U" in the latch but reshaping the bottom lip.

http://www.brianenos.com/forums/index.php?showtopic=183566&hl=

 

[bulletman]

Thanks man. I'll try to take some off. Sounds like worse case if I take a lil much off i can bend it a bit. Pics helped a lot. Sounds like I need to get to work.

 

[James Peel]

Just grind a little at a time, reassemble and check it out. You'll know when you get it right because that resistance you feel now as you have to push the shells in with that little extra "umph" at the end will be gone. When you hit that point, stop grinding!

 

[bulletman]

Sounds good thanks

 

[22+1]

I took the small spring out of my versa max carrier latch and it worked fine.