Rifle Compensator Testing and Reviews

I just picked up a Rolling Thunder and have a couple questions: Jesse or Rusty - when you installed the comp did you use a crush washer and was it difficult...or is this installation something that should be left to a pro? Next, does this comp limit me to the "open" class only because of the length? I would prefer to stay in tactical iron for a while since I am relatively new to the sport.
 
When I went to the Brownells website I saw their specs verbiage said that the Rolling Thunder was for Open. So I emailed out good buddy Larry Weeks at Brownells. Here is what he figured out in a matter of minutes and is having that Open division wording removed from their description.

On removing the “open” note from the Rolling Thunder copy: Yes the comp is 3.5” long and the rule says 3”. BUT, the 3” is measured from the end of the barrel. So, you screw the comp on and ½” of it is on the threads leaving only 3” protruding past the end of the barrel. USPSA Appendix E1, current rule set.

Larry
 
Jesse Tischauser said:
When I went to the Brownells website I saw their specs verbiage said that the Rolling Thunder was for Open. So I emailed out good buddy Larry Weeks at Brownells. Here is what he figured out in a matter of minutes and is having that Open division wording removed from their description.

On removing the “open” note from the Rolling Thunder copy: Yes the comp is 3.5” long and the rule says 3”. BUT, the 3” is measured from the end of the barrel. So, you screw the comp on and ½” of it is on the threads leaving only 3” protruding past the end of the barrel. USPSA Appendix E1, current rule set.

Larry
Click to expand...
Nicely done!
 
You must log in or register to reply here.

Latest posts

Random media

KDS9C FRAME MACHINING.jpg
77D7DBC9-DBA6-4B1B-A033-A8A2C012EF0C.jpeg
IMG_1033.jpeg
96E8F9EE-78B5-404A-A9ED-C53C4724E24C.jpeg
image.jpg
6C8F65D8-60B2-4021-9F80-94DD01609715.jpeg
1715175176711.png
Back
Top