Nordic deticated 22 RF upper from the last group buy

Calamity Jake

Fanatic
Joined
Apr 20, 2011
Messages
20
Location
Okla. City
Anyone having accuracy problems? Mine shot good(1" +/- at 50 yeards) for the first 200 rounds or so, now even after cleaning I'm lucky if I can get 2.5" at 50

I also posted this in the rifle section!!
 
Register to hide this ad
Mine is still dead on 2 years later, and a couple of thousand rounds, and I've only ran a bore snake through it a couple of times.
 
Jesse will be a long shortly to help you out as he know more about Nordic Products than even the guys at the factory, but in the mean time check your barrel crown for burrs which will cause exactly what you are experiencing
 
Jesse will be a long shortly to help you out as he know more about Nordic Products than even the guys at the factory, but in the mean time check your barrel crown for burrs which will cause exactly what you are experiencing

It has a flash hidder on so I know there's no burrs. Anything else?

Thanks for the replies.
 
Maybe your feed ramp is causing scratches to the bullets as they enter the chamber. Might chamber a few and eject them to inspect.

Or your optic or mount may be loose.

Or your barrel might be loose.

Or your nerves are fried.
 
It has a flash hidder on so I know there's no burrs. Anything else?

Thanks for the replies.

In addition to Wormy D's input

Having a muzzle device protects from a physical bump and such…a cleaning rod and its method of use can
mess up a crown.

Many a top rimfire shooter leave the bore alone and only clean the chamber. And only then when needed.
 
Ok guys no flames here but I been shooting/cleaning guns for 30+ years, I don't mess up crowns, as a matter of fact I have fixed a few over the years.
No loose barrel or optics and why all of a sudden does it start deforming bullets if it is at all, I'll check and see.

Thanks again for all the input.
 
Ok guys no flames here but I been shooting/cleaning guns for 30+ years, I don't mess up crowns, as a matter of fact I have fixed a few over the years.
No loose barrel or optics and why all of a sudden does it start deforming bullets if it is at all, I'll check and see.

Thanks again for all the input.

Understood Jake.
Anyway, hope you find the culprit. Still could be optics (internal)
 
I fail to see how a flash hide precludes muzzle crown problems, but thats cool. The chamber end can also cause these problems as someone noted Where is Jesse as he is one of the best gunsmiths I know.
 
Back
Top