technetium-99m
Mighty Righty
1 Redding 308 Type S Bushing size die. Has .335 .336 and .337 TiN neck bushings. This one is NIB. $90 shipped.
1 RCBS 223 full length X die, NIB. $30 shipped.
1 RCBS 223 Competition seat die, loaded around 600 rounds of 223 with this, comes with extended shellholder. $50 shipped.
The press is my spare LNL that I bought locally, it was incomplete when it came to me and is still missing a few parts. It comes with everything included from Hornady with the following exceptions. It is missing a large primer seating punch and the factory LNL powder measure. I used an RCBS uniflow measure in place of the Hornady part and it works great. The case feeder has a lower bracket that works to drop the cases from the waiting tube onto the shell plate. This bracket was broken by the original owner and repaired poorly with JB weld. It could be made to work again or a replacement ordered. The factory handle did not come with it, it was replaced with an aftermarket handle with a roller grip. I do not have a plate for the case feeder.
The bonus is all the extra parts it will come with. Machine will come with 5 shell plates, the #1 and the #30 are the newer style that fit the EZ ject sub plate. The #8, spare #1, and #6 are the older style. There is an EZ ject subplate installed, as well as a second used EZ ject plate, and the original old style plate with wire ejector will be included.
Other miscellaneous parts:
2-3 small primer punches and slides
2-3 primer slide return springs
1 large primer slide
6 new case return springs
2 new advance pawls
22 die bushings
Press is fully functional, I was using it to process 308 brass but I worked my way through the pile and this thing is now just excess stuff on the bench.
Price is a firm $350, open to most trades, you never know what I may find interesting.
