charger arms
Ask Me About My Cocker Spaniels
Contact your representative now!
http://www.gpo.gov/fdsys/pkg/CREC-20...1-3.pdf#page=3
SEC. ll. PROHIBITION ON TRANSFER OR POS- SESSION OF LARGE CAPACITY AM-
MUNITION FEEDING DEVICES.
(a) DEFINITION.â€"Section 921(a) of title 18, United States Code, is amended by inserting after paragraph (29) the following:
‘‘(30) The term ‘large capacity ammunition feeding device’â€"
‘‘(A) means a magazine, belt, drum, feed strip, or similar device that has a capacity of, or that can be readily restored or con- verted to accept, more than 10 rounds of am- munition; but
‘‘(B) does not include an attached tubular device designed to accept, and capable of op- erating only with, .22 caliber rimfire ammu- nition.’’.
(B) PROHIBITIONS.â€"Section 922 of such title is amended by inserting after subsection (u) the following:
‘‘(v)(1)(A)(i) Except as provided in clause (ii), it shall be unlawful for a person to transfer or possess a large capacity ammuni- tion feeding device. ‘‘(ii) Clause (i) shall not apply to the pos- session of a large capacity ammunition feed- ing device otherwise lawfully possessed with- in the United States on or before the date of the enactment of this subsection.
‘‘(B) It shall be unlawful for any person to import or bring into the United States a large capacity ammunition feeding device.
‘‘(2) Paragraph (1) shall not apply toâ€"
‘‘(A) a manufacture for, transfer to, or pos- session by the United States or a department or agency of the United States or a State or a department, agency, or political subdivi- sion of a State, or a transfer to or possession by a law enforcement officer employed by such an entity for purposes of law enforce- ment (whether on or off duty);
‘‘(B) a transfer to a licensee under title I of the Atomic Energy Act of 1954 for purposes of establishing and maintaining an on-site physical protection system and security or- ganization required by Federal law, or pos- session by an employee or contractor of such a licensee on-site for such purposes or off- site for purposes of licensee-authorized training or transportation of nuclear mate- rials;
‘‘(C) the possession, by an individual who is retired from service with a law enforcement agency and is not otherwise prohibited from receiving ammunition, of a large capacity ammunition feeding device transferred to the individual by the agency upon that re- tirement; or
‘‘(D) a manufacture, transfer, or possession of a large capacity ammunition feeding de- vice by a licensed manufacturer or licensed importer for the purposes of testing or ex- perimentation authorized by the Attorney General.’’.
(c) PENALTIES.â€"Section 924(a) of such title is amended by adding at the end the fol- lowing:
‘‘(8) Whoever knowingly violates section 922(v) shall be fined under this title, impris- oned not more than 10 years, or both.’’.
(d) IDENTIFICATION MARKINGS.â€"Section 923(i) of such title is amended by adding at the end the following: ‘‘A large capacity am- munition feeding device manufactured after the date of the enactment of this sentence shall be identified by a serial number that clearly shows that the device was manufac- tured after such date of enactment, and such other identification as the Attorney General may by regulation prescribe.’’.
http://www.gpo.gov/fdsys/pkg/CREC-20...1-3.pdf#page=3
SEC. ll. PROHIBITION ON TRANSFER OR POS- SESSION OF LARGE CAPACITY AM-
MUNITION FEEDING DEVICES.
(a) DEFINITION.â€"Section 921(a) of title 18, United States Code, is amended by inserting after paragraph (29) the following:
‘‘(30) The term ‘large capacity ammunition feeding device’â€"
‘‘(A) means a magazine, belt, drum, feed strip, or similar device that has a capacity of, or that can be readily restored or con- verted to accept, more than 10 rounds of am- munition; but
‘‘(B) does not include an attached tubular device designed to accept, and capable of op- erating only with, .22 caliber rimfire ammu- nition.’’.
(B) PROHIBITIONS.â€"Section 922 of such title is amended by inserting after subsection (u) the following:
‘‘(v)(1)(A)(i) Except as provided in clause (ii), it shall be unlawful for a person to transfer or possess a large capacity ammuni- tion feeding device. ‘‘(ii) Clause (i) shall not apply to the pos- session of a large capacity ammunition feed- ing device otherwise lawfully possessed with- in the United States on or before the date of the enactment of this subsection.
‘‘(B) It shall be unlawful for any person to import or bring into the United States a large capacity ammunition feeding device.
‘‘(2) Paragraph (1) shall not apply toâ€"
‘‘(A) a manufacture for, transfer to, or pos- session by the United States or a department or agency of the United States or a State or a department, agency, or political subdivi- sion of a State, or a transfer to or possession by a law enforcement officer employed by such an entity for purposes of law enforce- ment (whether on or off duty);
‘‘(B) a transfer to a licensee under title I of the Atomic Energy Act of 1954 for purposes of establishing and maintaining an on-site physical protection system and security or- ganization required by Federal law, or pos- session by an employee or contractor of such a licensee on-site for such purposes or off- site for purposes of licensee-authorized training or transportation of nuclear mate- rials;
‘‘(C) the possession, by an individual who is retired from service with a law enforcement agency and is not otherwise prohibited from receiving ammunition, of a large capacity ammunition feeding device transferred to the individual by the agency upon that re- tirement; or
‘‘(D) a manufacture, transfer, or possession of a large capacity ammunition feeding de- vice by a licensed manufacturer or licensed importer for the purposes of testing or ex- perimentation authorized by the Attorney General.’’.
(c) PENALTIES.â€"Section 924(a) of such title is amended by adding at the end the fol- lowing:
‘‘(8) Whoever knowingly violates section 922(v) shall be fined under this title, impris- oned not more than 10 years, or both.’’.
(d) IDENTIFICATION MARKINGS.â€"Section 923(i) of such title is amended by adding at the end the following: ‘‘A large capacity am- munition feeding device manufactured after the date of the enactment of this sentence shall be identified by a serial number that clearly shows that the device was manufac- tured after such date of enactment, and such other identification as the Attorney General may by regulation prescribe.’’.