If this is the case, people that don't read this enitre thread to find this out are going to be pissed when the upper they order doesn't fit.
Sold/Expired LOKI Weapon Systems Billet Upper/Lower or Forged Complete Upper Group Buy
- Thread starter jtischauser
- Start date
- Status
jtischauser
I'm addicted to kicking ass
bsdubois00
Head Honcho Emeritus
MY FAULT - sorry - the BILLET upper/lower is a set that will not go on another milspec - the FORGED upper is MILSPEC
jtischauser
I'm addicted to kicking ass
Post up what you want and I will send LOKI a message with your desires. I never really asked about a deal the custom stuff for the group buy. I was just going to get one because I have always wanted a 16" middy to try and it woudl help us make the 20 uppers we need for the discount.
Matt1911
Cyrwus Jr.
If I can't switch around their billet upper with my different lowers then that's a deal breaker for me. I'm out of this one, thanks for the opportunity though.
Jackary
Well-Known Fanatic
They make millspec uppers i believe the group buy is for one of those or for one of there matched upper and lower which is not millspec
Forged Upper
http://www.lokiweaponsystems.com/products/uppers/
Matched Upper/Lower
http://www.lokiweaponsystems.com/products/lwsf-lower-upper/
Forged Upper
http://www.lokiweaponsystems.com/products/uppers/
Matched Upper/Lower
http://www.lokiweaponsystems.com/products/lwsf-lower-upper/
bsdubois00
Head Honcho Emeritus
Correct - you can get either the MATCHED set of BILLET upper/lower which must go together because of the design
OR
A FORGED Upper which will fit ANY milspec lower
OR
A FORGED Upper which will fit ANY milspec lower
technetium-99m
Mighty Righty
I want a upper/lower receiver set, are we putting an official list together yet?
jtischauser
I'm addicted to kicking ass
Let's start the list so we can see where we are at. I'm gonna have a custom upper built.
Billet Upper/Lower Set
Forged Upper
Jesse Tischauser - 1 - 16" Barrel w/Intermediate Gas, PRI Low Profile Adjustable Gas Block, Carbon Arms 15" Handguard, JP Low Mass BCG, Fail Zero Coated Charging Handle, Rolling Thunder Comp
Billet Upper/Lower Set
Forged Upper
Jesse Tischauser - 1 - 16" Barrel w/Intermediate Gas, PRI Low Profile Adjustable Gas Block, Carbon Arms 15" Handguard, JP Low Mass BCG, Fail Zero Coated Charging Handle, Rolling Thunder Comp
technetium-99m
Mighty Righty
Let's start the list so we can see where we are at. I'm gonna have a custom upper built.
Billet Upper/Lower Set
GT - 1 Receiver set
Forged Upper
Jesse Tischauser - 1 - 16" Barrel w/Intermediate Gas, PRI Low Profile Adjustable Gas Block, Carbon Arms 15" Handguard, JP Low Mass BCG, Fail Zero Coated Charging Handle, Rolling Thunder Comp
Billet Upper/Lower Set
GT - 1 Receiver set
Forged Upper
Jesse Tischauser - 1 - 16" Barrel w/Intermediate Gas, PRI Low Profile Adjustable Gas Block, Carbon Arms 15" Handguard, JP Low Mass BCG, Fail Zero Coated Charging Handle, Rolling Thunder Comp
bsmith918
Well-Known Fanatic
Billet Upper/Lower Set
GT - 1 Receiver set
bsmith918 - 1 Receiver set (depending on whether we can get different colors as shown on LOKI's website)
Forged Upper
Jesse Tischauser - 1 - 16" Barrel w/Intermediate Gas, PRI Low Profile Adjustable Gas Block, Carbon Arms 15" Handguard, JP Low Mass BCG, Fail Zero Coated Charging Handle, Rolling Thunder Comp
bsmith918 - 1 - 18" Barrel, 6.5 Grendel, FZ BCG/CH
bsmith918 - 1 - 14.5" Barrel, Midlength, Patrol Rifle
GT - 1 Receiver set
bsmith918 - 1 Receiver set (depending on whether we can get different colors as shown on LOKI's website)
Forged Upper
Jesse Tischauser - 1 - 16" Barrel w/Intermediate Gas, PRI Low Profile Adjustable Gas Block, Carbon Arms 15" Handguard, JP Low Mass BCG, Fail Zero Coated Charging Handle, Rolling Thunder Comp
bsmith918 - 1 - 18" Barrel, 6.5 Grendel, FZ BCG/CH
bsmith918 - 1 - 14.5" Barrel, Midlength, Patrol Rifle
Billet Upper/Lower Set
GT - 1 Receiver set
bsmith918 - 1 Receiver set (depending on whether we can get different colors as shown on LOKI's website)
Forged Upper
Jesse Tischauser - 1 - 16" Barrel w/Intermediate Gas, PRI Low Profile Adjustable Gas Block, Carbon Arms 15" Handguard, JP Low Mass BCG, Fail Zero Coated Charging Handle, Rolling Thunder Comp
bsmith918 - 1 - 18" Barrel, 6.5 Grendel, FZ BCG/CH
bsmith918 - 1 - 14.5" Barrel, Midlength, Patrol Rifle
Keyser328 - 1 - 16" Barrel, Midlength gas, Midlength full float rail system, model "LWS STD Forged Upper", FZ BCG & charge handle options. Also, can you see if they'll add in the FZ lower parts kit?
GT - 1 Receiver set
bsmith918 - 1 Receiver set (depending on whether we can get different colors as shown on LOKI's website)
Forged Upper
Jesse Tischauser - 1 - 16" Barrel w/Intermediate Gas, PRI Low Profile Adjustable Gas Block, Carbon Arms 15" Handguard, JP Low Mass BCG, Fail Zero Coated Charging Handle, Rolling Thunder Comp
bsmith918 - 1 - 18" Barrel, 6.5 Grendel, FZ BCG/CH
bsmith918 - 1 - 14.5" Barrel, Midlength, Patrol Rifle
Keyser328 - 1 - 16" Barrel, Midlength gas, Midlength full float rail system, model "LWS STD Forged Upper", FZ BCG & charge handle options. Also, can you see if they'll add in the FZ lower parts kit?
bsdubois00
Head Honcho Emeritus
Keyser - If 'm NOT mistaken - the FZ trigger group and what not comes STANDARD on all their uppers and rifles....JT find out for sure - but im 99% positive...
I was just basing it off of what I saw here: http://www.lokiweaponsystems.com/products/forged-upper-std-5.56/ The FZ BCG is an option at the bottom, so I wanted to specify.
The LPK is a separate part from what I can see, as listed here: http://www.lokiweaponsystems.com/products/m4-ar-15-parts-kit/
I just wanted to be sure there wasn't any confusion. The 25% off is a fantastic deal!
The LPK is a separate part from what I can see, as listed here: http://www.lokiweaponsystems.com/products/m4-ar-15-parts-kit/
I just wanted to be sure there wasn't any confusion. The 25% off is a fantastic deal!
jtischauser
I'm addicted to kicking ass
bsmith918
Well-Known Fanatic
I'll put is back after their current GB is over, assuming I get the OK from the admin. I don't really care about participating in discussions over their, but would like to be able to use the classifieds.
Billet Upper/Lower Set
GT - 1 Receiver set
bsmith918 - 1 Receiver set (depending on whether we can get different colors as shown on LOKI's website)
Forged Upper
Jesse Tischauser - 1 - 16" Barrel w/Intermediate Gas, PRI Low Profile Adjustable Gas Block, Carbon Arms 15" Handguard, JP Low Mass BCG, Fail Zero Coated Charging Handle, Rolling Thunder Comp
bsmith918 - 1 - 18" Barrel, 6.5 Grendel, FZ BCG/CH
bsmith918 - 1 - 14.5" Barrel, Midlength, Patrol Rifle
Keyser328 - 1 - 16" Barrel, Midlength gas, Midlength full float rail system, model "LWS STD Forged Upper", FZ BCG & charge handle options. Also, can you see if they'll add in the FZ lower parts kit?
ocphy - 1 - LWS STD complete forged upper (will decide on BCG later)
ocphy - 1 - LWS Rifle complete forged upper (will decide on BCG later)
GT - 1 Receiver set
bsmith918 - 1 Receiver set (depending on whether we can get different colors as shown on LOKI's website)
Forged Upper
Jesse Tischauser - 1 - 16" Barrel w/Intermediate Gas, PRI Low Profile Adjustable Gas Block, Carbon Arms 15" Handguard, JP Low Mass BCG, Fail Zero Coated Charging Handle, Rolling Thunder Comp
bsmith918 - 1 - 18" Barrel, 6.5 Grendel, FZ BCG/CH
bsmith918 - 1 - 14.5" Barrel, Midlength, Patrol Rifle
Keyser328 - 1 - 16" Barrel, Midlength gas, Midlength full float rail system, model "LWS STD Forged Upper", FZ BCG & charge handle options. Also, can you see if they'll add in the FZ lower parts kit?
ocphy - 1 - LWS STD complete forged upper (will decide on BCG later)
ocphy - 1 - LWS Rifle complete forged upper (will decide on BCG later)
shooterdave
Uncivil Servant
Billet Upper/Lower Set
GT - 1 Receiver set
bsmith918 - 1 Receiver set (depending on whether we can get different colors as shown on LOKI's website)
shooterdave - 1. Receiver set. (FDE if we can colors)
Forged Upper
Jesse Tischauser - 1 - 16" Barrel w/Intermediate Gas, PRI Low Profile Adjustable Gas Block, Carbon Arms 15" Handguard, JP Low Mass BCG, Fail Zero Coated Charging Handle, Rolling Thunder Comp
bsmith918 - 1 - 18" Barrel, 6.5 Grendel, FZ BCG/CH
bsmith918 - 1 - 14.5" Barrel, Midlength, Patrol Rifle
Keyser328 - 1 - 16" Barrel, Midlength gas, Midlength full float rail system, model "LWS STD Forged Upper", FZ BCG & charge handle options. Also, can you see if they'll add in the FZ lower parts kit?
ocphy - 1 - LWS STD complete forged upper (will decide on BCG later)
ocphy - 1 - LWS Rifle complete forged upper (will decide on BCG later)
GT - 1 Receiver set
bsmith918 - 1 Receiver set (depending on whether we can get different colors as shown on LOKI's website)
shooterdave - 1. Receiver set. (FDE if we can colors)
Forged Upper
Jesse Tischauser - 1 - 16" Barrel w/Intermediate Gas, PRI Low Profile Adjustable Gas Block, Carbon Arms 15" Handguard, JP Low Mass BCG, Fail Zero Coated Charging Handle, Rolling Thunder Comp
bsmith918 - 1 - 18" Barrel, 6.5 Grendel, FZ BCG/CH
bsmith918 - 1 - 14.5" Barrel, Midlength, Patrol Rifle
Keyser328 - 1 - 16" Barrel, Midlength gas, Midlength full float rail system, model "LWS STD Forged Upper", FZ BCG & charge handle options. Also, can you see if they'll add in the FZ lower parts kit?
ocphy - 1 - LWS STD complete forged upper (will decide on BCG later)
ocphy - 1 - LWS Rifle complete forged upper (will decide on BCG later)
stroker-c10
Well-Known Fanatic
If we could get this rolling, I would be in for an upper just have to make up my between the rifle and standard model.
jtischauser
I'm addicted to kicking ass
The only way to get it rolling is to post what you're interested in. You are not obligated to anything any you can change at anytime. If we don't get interest I would get off my lazy ass and make it happen.
They were willing to do a buy in 10 items but the discount wasn't as great.
- Status
