Let's see your 3-Gun/"Tacticool" rifle set up!

[White Kid]

Let's see your 3-Gun/"Tacticool" rifle set up!
I'm tryna' get some ideas on what I oughta' do to my rifles and projects I'mma do in the near future.
Right now the only things I have on my AR is a Magpul MBUS Rear Sight, Brownell's Front Sight, a Magpul Carbine length hand guard, and a Magpul MIAD grip.
Here's a list of what I'm probably gonna' get on my rifle.:

1) Battlelink Minimalist Stock (black)
2) CMC 3.5lbs flat trigger (sliver)
3) Samson EVO 15" KeyMod Handguard (black)
4) Samson small rail (black)
5) Fortis SHIFT small angled foregrip (black) or LaRue Tactical Handstop (black)
6) Griffen Armament left handed offset sights (black)
7) Lund/SJC Titan Comp (silver)
8) Odin Works XMR2 Extended Magazine Release (black)
9) Seekins Precision Adjustable Low Profile Gas Block or Syrac Low Profile Adjustable Gas Block (sliver)
10) Vortex 30mm Cantilever 3" Scope Mount (black)
11) Vortex 30mm Crossfire II Scope (black)

I'm also gonna' get it Cerakote matte maroon brick red and get the Georgia Bulldogs emblem of the bulldogs head engraved on the right side of the magwell and get "GO DAWGS!" engraved on the left side of the upper receiver where the BCG is located. I'm gonna' keep the trigger, barrel, gas block, and comp silver and keep the offset sights, mount, and scope black.

But between now and then I might have some things changed out on it so that's why I wanna' see what y'all have as your set up for 3-Gun or as a tactical gun.
Also list what you have on it to so I know what it is.

 

[White Kid]

Here's my rifle:

Sent from my iPhone using Tapatalk

 

[charger arms]

I like the MIAD grip. The little compartment is great for hiding Skittles.

 

[White Kid]

I like the MIAD grip. The little compartment is great for hiding Skittles.

I forgot it has that compartment, I need'a throw some in there.

 

[bigsampson]

Here is my main match rifle.
View attachment 9386
View attachment 9388
Gibbz Side Charger upper, I really like this upper. Non reciprocating and I think more ergonomic.
Quinten Defense Navy Billet lower.
Hyperfyre 24c
AP customs low mass bolt
Jp captured spring
JP Heat Sink (probably overkill and not in pictures)
JP 18 inch light weight barrel
JP low profile adjustable gas
BCM KMR 15 inch hand guard
JP comp
Warne SKEL mount
BAD Lever
Vortex Razor JM reticle 1x6 (I agree, it is a brick, but imo, the best thing going.)
Oversize mag release.
Ace Stock

 

[billdozer]

A little something I threw together for bay matches.

 

[Tuflehundon]

Here's Mine:
Spikes upper and lower
RRA LPK
Hiperfire 24C (black NiB coated)
MagPul UBR stock, MIAD+ grip, trigger guard, and BAD lever
Adams Arms XLP piston conversion with low mass bolt carrier
JP silent captured sping
Samson Evolution rail
Alpha stainless match mid weight barrel
SJC Titan comp
GripPod verticle grip with bipod
Bushnell PCL 1-4 scope w/ SWFA SSALT mount
EOTech 512 offset
Devil Dog Concepts Hard Charger (side charging handle conversion)
Surefire 6PX Defender

 

[billdozer]

Here's my "other" one. Hopefully this will be my main rifle once she gets some rounds on her.
Battle arms receivers
Slr handguard and gas block
Satern barrel
Whiskey arms aluminum bolt
Sjc titan
Elfmann trigger
Taccom ulw buffer
Ace stock
Ad mount
Swaro scope
Combat divers grip

 

[Dan Haught]

Just got to test it out and zero it today. Shoots pretty good and stays on target nicely. I just need to learn how to run one of these.

Seekins lower.
Vltor MUR upper.
Criterion 16" hybrid barrel.
Precision Armament M11 SPR brake.
SLR adjustable gas block.
Geissele SSA-E.
Rainier Arms Match BCG.
Standard buffer and spring.
ACE stock.

 

[m1dad]

Just finished this one;

Lancer lower with tactical mag well
Nordic Comp upper
Nordic Comp 16" Wylde barrel
Nordic Comp rifle length hand guard
JP Rifles low mass BCG
JP Rifles silent capture buffer spring
Geissele SD 3 gun trigger
Surefire SFMB muzzle brake
Syrac Ordnance adjustable gas block
Lancer carbor fiber stock

 

[dfinan]

After a long time assembling parts, getting a ton of help from William Cob and Monte Long with XS sites my new AR is done except for the sights, havent decided what a good optic to get for it is yet. Here is the list and a picture (sorry its not a great quality picture)

1. Mag Tech Lower
2. Aero Precision Upper w/o Forward assist
3. AP Carbon Fibre Hexagonal 17" foregrip
4. Miceluk Comp
5. 18" .223 Wylde Stainless Steel Double Fluted Lightweight Barrel
6. Rifle Length Gas System
7. JP/Syrac Adjustable Gas Block
8. Boomfab Complete Titanium BCG
9. Nordic Charging Handle
10. Jp Lower Parts kit
11. JP EZ trigger (Monte did a great job on this trigger)
12.JP BAD device
13. Ace Skeleton Stock fixed length

I think thats it here is the picture, and if anyone has some suggestions on an optic to drop on this send me a pm.

 

[CPWSA]

 

[CPWSA]

JP upper, lower, silent spring system, trigger pins, enhanced bolt, and low mass bolt carrier, Elftmann 3 Gun Flat Trigger, Magpul trigger guard, Arredondo mag release button, Advanced Performance Shooting Combat Diver Grip, Bravo Company Gunfighter stock and 13" keymod handguard, steel charging handle with oversize tactical latch, 16" barrel, fluted, 1 in 9 twist, mid-length gas, syrac adjustable gas block, VTAC LPSM (not shown), Lantac Dragon brake, and CMore ATAC. Weighs 6 pounds 14 ounces.

The only change I make is swap the CMore for a Swaro Z6i when shooting matches with long range.

Work gun is basically the same setup except it has a 4.5 pound CMC flat trigger to meet the trigger pull requirements for NRA Tactical Police Matches.

 

[wgm2011]

I thought I was the only one that mounted a C-More on an AR. They are great for those bay only matches.

Bill

 

[benny hill]

I have a C-more on my 10" car gun and love it w/ a 6 min. dot.

 

[CPWSA]

Flatland Shooter - agreed. With the ATAC and a flip up front, or a regular CMore with co-witness irons, it ain't a bad close quarters tactical setup either for everything except extreme hard use environments.

 

[P.E. Kelley]

You certainly don't have to spend this much for a good carbine and you can definitely spend more.
But this has been the nicest one I have ever shot.
http://youtu.be/6N1kwixQlNw

 

[CPWSA]

I took some of our 16" barrels and cut them down to 14.5", then permanently attached a muzzle brake to prevent having to get a SBR tax stamp. Testing this setup now. I'm liking it so far. The small bit of length reduction is noticeable when comparing the 14.5" upper to the 16" barrel version in tight quarters, patrol car, residence, etc.