Graphite Powder in Mag Tube

Register to hide this ad
just squirt a few puffs in the hole on the end of the cap, then load/unload with shells a few times.....no disassembly required.
 
I bought a big bottle of powder from Napa Auto Parts I believe. I cut a small hole in the tip and squeeze some into the hole in the end of my Nordic Components tube. I also squeeze some down into the OEM tube before I put the gun back together. Shake the gun up and down and even tip it upside down. Then load the tube a few times. TI should get everywhere including on your hands.
 
Jesse, you mean a bottle of Accurate Ron's tube lube, right??
and you bought it from Make Ready Pro Shop, right??

because when it comes to lube, quality makes a difference
 
mike cyrwus said:
Jesse, you mean a bottle of Accurate Ron's tube lube, right??
and you bought it from Make Ready Pro Shop, right??

because when it comes to lube, quality makes a difference
Damn! I thought the Accurate Ron lube was limited edition. Thought it was out of stock.
 
mike cyrwus said:
Jesse, you mean a bottle of Accurate Ron's tube lube, right??
and you bought it from Make Ready Pro Shop, right??

because when it comes to lube, quality makes a difference
I bought a bottle, lost it, then found it again after buying another one. You need to imbed a gps tracking chip in the bottle.
 
JPeel said:
I bought a bottle, lost it, then found it again after buying another one. You need to imbed a gps tracking chip in the bottle.
Ron would have send you a new one free; he loves sob stories!
 
I had some, until my white Lab puppy got hold of it and turned into a Dalmatian. Why Ron, why?
 

Attachments

  • image.jpg
    image.jpg
    77.6 KB · Views: 8
Back
Top