Fusion Firearms Fusion C Class assembled

KS95B40

Well-Known Fanatic
Joined
Jun 8, 2018
Messages
246
Location
Kansas Flint Hills
After almost a year, I did finally finish the stripped Fusion C Class frame and mate it to a slide.

The frame was assembled using parts (some new, some takeoff) that I had accumulated from different sources.

The slide was a new take off RIA. It came with a barrel but I used a stainless Colt barrel instead. A stainless SA barrel bushing and a WC Bulletproof extractor.
The grips are Guuun G10. The grips are decent and less than half the price of VZs however instead of the $30 or so savings I wish that I would have just bought the VZ G10 grips.

The frame is still in the white, I can’t make up my mind how I want to finish it.

4C94D450-022C-45E9-9303-9ADA7C63C47A.jpeg
This is where the slide bound on the frame rails. The slide was straight so I used black magic marker and very fine files until I worked the high spots down and for it to fit.
F0752E26-7344-452D-8849-9124B9AF3B15.jpeg
BBFB0E15-9149-4F73-B7A5-9AE07E74C23F.jpeg
3C5B510F-3723-4228-8065-5F94A7545365.jpeg07B99849-1318-4F02-AAA4-22263DC1FF72.jpeg
 

KS95B40

Well-Known Fanatic
Joined
Jun 8, 2018
Messages
246
Location
Kansas Flint Hills
The only thing that I still need to do is blend the bottom of the frame tangs to match the contour of the grip safety. I’ll do that before I finally finish the frame.
99AC1C7D-AAD6-4A15-872A-96165EEAB1E4.jpegC03E10CC-FDA0-4508-A5E3-E5B9FC8BFBB7.jpegDB9EDCFA-1B27-4D47-A0A4-2DD23D534EC5.jpeg
 

Attachments

  • 32DB3AFC-4418-4E76-8416-683CC2BF1A4D.jpeg
    32DB3AFC-4418-4E76-8416-683CC2BF1A4D.jpeg
    968.9 KB · Views: 2
Top