Feegee
The Magic Man
Good meter with strong case 115.00$$
View attachment 4110
The 73 series II is a range of rugged, high quality 3 digit hand held multimeters designed to satisfy the increasing demands of both electrical and electronic engineers by providing more automatic features and greater levels of accuracy.
The range spans the basic FLUKE 70 model (without current ranges) across the familiar FLUKE 73, 75 and 77 models to the high performance full feature FLUKE 79 model.
The 73 series II share standard features:
- automatic touch hold
- autoranging
- manual range hold
- audible continuity test
- diode test
- digital and analogue bar graph displays
- auto power turn off after one hour of non use
- supplied with FLUKE TL75 test leads having sharp, hard point tip probes
General
Voltage (max) : 1000 V
Dimensions : 28 x 75 x 166 mm
Protective standard : Safety Class 2, UL1244,VDE/ANSI-S82)
CSA C22.2 No 231, VDE 0411, IEC348
Battery : 9 Volt
V(DC) Basic accuracy
0.32-320V
±(0.4%+1digit)
V(DC) Input impedance >10 MOhm <50 pF
V(AC) Basic accuracy
45-500Hz/3.2V
±(2%+2digit)
45Hz-1kHz/32-750V
±(2%+2digit)
V(AC) Input impedance >10 MOhm <50 pF
I(DC) Basic accuracy
10A ±(1.5%+2digit)
I(AC) Basic accuracy
45Hz-1kHz/10A ±(2.5%+2digit)
Resistance Basic accuracy
320 Ohm ±(0.5%+2digit)
3.2k-3.2MOhm ±(0.5%+1digit)
32MOhm ±(2%+1digit)
Sent from Feegee's iPhone using Tapatalk
View attachment 4110
The 73 series II is a range of rugged, high quality 3 digit hand held multimeters designed to satisfy the increasing demands of both electrical and electronic engineers by providing more automatic features and greater levels of accuracy.
The range spans the basic FLUKE 70 model (without current ranges) across the familiar FLUKE 73, 75 and 77 models to the high performance full feature FLUKE 79 model.
The 73 series II share standard features:
- automatic touch hold
- autoranging
- manual range hold
- audible continuity test
- diode test
- digital and analogue bar graph displays
- auto power turn off after one hour of non use
- supplied with FLUKE TL75 test leads having sharp, hard point tip probes
General
Voltage (max) : 1000 V
Dimensions : 28 x 75 x 166 mm
Protective standard : Safety Class 2, UL1244,VDE/ANSI-S82)
CSA C22.2 No 231, VDE 0411, IEC348
Battery : 9 Volt
V(DC) Basic accuracy
0.32-320V
±(0.4%+1digit)
V(DC) Input impedance >10 MOhm <50 pF
V(AC) Basic accuracy
45-500Hz/3.2V
±(2%+2digit)
45Hz-1kHz/32-750V
±(2%+2digit)
V(AC) Input impedance >10 MOhm <50 pF
I(DC) Basic accuracy
10A ±(1.5%+2digit)
I(AC) Basic accuracy
45Hz-1kHz/10A ±(2.5%+2digit)
Resistance Basic accuracy
320 Ohm ±(0.5%+2digit)
3.2k-3.2MOhm ±(0.5%+1digit)
32MOhm ±(2%+1digit)
Sent from Feegee's iPhone using Tapatalk