- Joined
- Feb 16, 2018
- Messages
- 127
Eric asked me if he could build a gun from scratch while he was working on some other things. I said sure, why not. I kind of knew what he was doing but not entirely. Yesterday I came back from getting flood supplies and found this in the safe ready to sell!
As usual I did go through the entire thing before it was blued to check for quality personally and I did manage to get him to let me shoot 100 rounds out of it myself. It's a laser! Eric did an exceptional job on the build.
So here it is! A custom WMG-TLR Two Tone in .45Auto.
It has the following features:
~ Stainless slide fit to Chambers Custom WMG-TLR frame
~ All stainless small parts.
~ Kart .45 NM barrel fit with Kart bushing
~ Full length guide rod stippled on the end
~ CCP Thumb safety stippled on top
~ CCP Slide stop stippled on top and bottom
~ Slide stop flush cut and hole recessed
~ Caspian extractor fit and stippled
~ EGW ejector fit and stippled
~ CCP Grip safety stippled on back
~ S&A Mainspring housing stippled
~ CCP/Greider Magcatch stippled
~ Front strap of frame stippled
~ Slide top stippled
~ Rear of slide stippled
~ Boarder cut on top edge of slide
~ Bottom of slide beveled
~ Front and back of slide and front of frame hand beveled
~ Ball cuts on slide dust cover
~ CCP Buried and adjustable rear sight
~ CCP Blended dovetail front sight
~ Wolff 23# mainspring
~ SpringCo USA 18# recoil spring
~ Blue VZ Grips
~ Two tuned CCP magazines
~ 200 rounds fired during testing
Price is $5295.00 plus shipping
To purchase e-mail me at [email protected]
As usual I did go through the entire thing before it was blued to check for quality personally and I did manage to get him to let me shoot 100 rounds out of it myself. It's a laser! Eric did an exceptional job on the build.
So here it is! A custom WMG-TLR Two Tone in .45Auto.
It has the following features:
~ Stainless slide fit to Chambers Custom WMG-TLR frame
~ All stainless small parts.
~ Kart .45 NM barrel fit with Kart bushing
~ Full length guide rod stippled on the end
~ CCP Thumb safety stippled on top
~ CCP Slide stop stippled on top and bottom
~ Slide stop flush cut and hole recessed
~ Caspian extractor fit and stippled
~ EGW ejector fit and stippled
~ CCP Grip safety stippled on back
~ S&A Mainspring housing stippled
~ CCP/Greider Magcatch stippled
~ Front strap of frame stippled
~ Slide top stippled
~ Rear of slide stippled
~ Boarder cut on top edge of slide
~ Bottom of slide beveled
~ Front and back of slide and front of frame hand beveled
~ Ball cuts on slide dust cover
~ CCP Buried and adjustable rear sight
~ CCP Blended dovetail front sight
~ Wolff 23# mainspring
~ SpringCo USA 18# recoil spring
~ Blue VZ Grips
~ Two tuned CCP magazines
~ 200 rounds fired during testing
Price is $5295.00 plus shipping
To purchase e-mail me at [email protected]
