Bunch of stuff #1

[FortyMikeMike]

What model gun is the dawson ICE magwell for?

 

[Wall]

looks like 2011

 

[mike cyrwus]

yes 2011

 

[Dieseltech09]

Take a $100 for both surefire mags? I can come get them or you can mail them to me. Either way, If your still looking for a cheap AR lower I have an Anderson Blem....

 

[mike cyrwus]

mmm, thats cheap as dirt as is, Brian. I gotta stand firm on the $135 for both.

Id take a bill and that lower??

either way, but Id also give you a couple boxes of some defense 45 ammo for that lower; I still have some 230gr ranger bonded.

matter of fact, if you pass on the surefire 60's, Im going to pull em from the ad and keep em til the next panic.

 

[Dieseltech09]

Yeah a bill and the lower, that will work. I figured you wouldn't go any lower but I had to try,

You going to be around tomorrow or Sunday? I'm off all weekend so I can run out whenever.

 

[mike cyrwus]

Yeah a bill and the lower, that will work. I figured you wouldn't go any lower but I had to try,

You going to be around tomorrow or Sunday? I'm off all weekend so I can run out whenever.

send you a text, amigo

 

[mike cyrwus]

updated

1. New KKM bull barrel, .40 cal, c/p ramp $165
2. Wilson 1911 trigger, new $15
3. Rcbs handpriming tool, new $35
4. Hornady Powder cop, new or like new, cant tell $20
5. Primary Arms red dot https://www.primaryarms.com/Primary_Arms_Micro_Dot_With_Fixed_Base_p/md-fbgii.htm $60SPF
6. Warne 34mm #222M high mount, matte, non QD, new $40
7. Warne 30mm QD, #217L, new or like new, I cant tell $45
8. Mag coupler mag grip, used exc. Cond. iots a hi-end coupler very nice, For usgi mags $10
9. Set of core M&P grips. These are unobtanium, all three for $35 sold
10. Three stock 140mm sti mags, 45acp. A couple were lightly used to test fire, one appears unused. Back of spine lightly engraved “I, II, III”â€"assume they all need tuning . $120
11. New MOE K grip $10 spf shane
12. Aggressively stippled moe magpul grip, used, w/screw $10 spf shane
13. CAA grip, exc. Condition w screw $5
14. 250ct. nosler bthp 69gr .223 match bullets $45 sold
15. 100ct. Hornady 68gr .223 bthp $15 SPF
16. Used 3# Jard trigger, these are $125 new only thing I did was modify the head of a bolt for clearance, you can get one from lowes or Ace hwd. $50. Tech support from me not included
17. Colt Carry handle like new, a little witness mark paint $65 sold
18. Troy fixed front sight, cerakoted, with small diameter blade $30 spf matt
19. YHM picatinny riser moves rings, etc up ½” $20
20. 2 sps 140mm mag tubes. These used to be the ticket for 21rds. Front weld is starting to split on these two. Otherwise like new. Got tig? Have at it $40 for both still available; someone cant count!
21. .308 brake, looks like an old style, slim diameter miculek. 5/8”x24 $15
22. Blue anodized dawson ICE magwell. Used, but exc condition. $40
23. BFB Nordic bolt releases for benellis $15 each (have one left)
24. Three used-ass dawson 2011 +1 mag bases, have initials engraved on the bottom. Still work fine! These can be your H&H hit the concrete pads.. $50 for the threeSPF
25. Another 2011 DP +1 pad, much nicer shape $20 SPF
26. 3 titanium grey M&P TTI basepads w springs. Shot two matches with these, excellent shape. These are the infamous “Jared Carpenter Head” numbering system. Only selling because Im uncomfortable dryfiring in the nude with these. $100 for the three SPF
27. Original “clipdraw” for glocks Get this before Burk sees it $10
28. KNS Push Button Quick Takedown Pin $5 spf to matt
29. thrust button bracing device for AR handguard $15
30. Carbine .ar15 handguard set w barrel nut, delta ring, guards, and end cap $20
31. used dpms .308 carbine ff tube, cerakoted fde used, $10
32. used and super lightened via mill dpms rifle length 308 tube , $20 spf to jp morgan
33. grips, free if you buy something spf to robusto
34. carbine handguards , free if you buy something jp morg
35. rifle handguards, free if you buy something jp morg
36. new undrilled FSB, .750 has sight parts $20 jp morg
37. faux gas block from cmmg 22 upper. .750 Could be drilled for a gas port, I suppose, free if you buy something jp morg
38. Plano case comes with a gun rest also. used and dusty, otherwise fine shape $15 http://www.midwayusa...ycarbonate-camo sold
39. 2 wire handgun racks for safe, each holds 6 $10 for both gone
40. used surefire mag exc shape, only used it a couple times $60 sold
41. new in plastic 60rd SF mag $75 sold
42. Bullshooter handgun rest $35 spf to robusto

 

[luke.reninger]

Does the ice magwell have an insert? If so, i'll take it.

 

[mike cyrwus]

Does the ice magwell have an insert? If so, i'll take it.

yes
yours
come see me tomorrow?

 

[luke.reninger]

Sounds good man. I meant to pick that up from you when I dropped the safe off.

 

[mike cyrwus]

Ill update what I have left here in a lil bit

 

[racnsoonr]

I'll take the powder cop #4

 

[mike cyrwus]

I'll take the powder cop #4

yours

 

[mike cyrwus]

updated
Hornady Powder cop, new or like new, cant tell $20 sold to jg
Warne 34mm #222M high mount, matte, non QD, new $40
Warne 30mm QD, #217L, new or like new, I cant tell $45
CAA grip, exc. Condition w screw $5
Used 3# Jard trigger, these are $125 new only thing I did was modify the head of a bolt for clearance, you can get one from lowes or Ace hwd. $50. Tech support from me not included
YHM picatinny riser moves rings, etc up ½” $20
2 sps 140mm mag tubes. These used to be the ticket for 21rds. Front weld is starting to split on these two. Otherwise like new. Got tig? Have at it $30 for both
BFB Nordic bolt release for benelli $15
Original “clipdraw” for glocks Get this before Burk sees it $5
thrust button bracing device for AR handguard $10
Carbine .ar15 handguard set w barrel nut, delta ring, guards, and end cap $15
used dpms .308 carbine ff tube, cerakoted fde used, $5

 

[mike cyrwus]

bump because tony has a million posts that he bumps every hour

 

[fairwaybound]

Bfb bolt release fit an m1?

 

[Wall]

Bfb bolt release fit an m1?

yes, if the bolt has the oval around the hole the bolt handle goes in