mike cyrwus
.223
- Joined
- Sep 17, 2010
- Messages
- 4,826
Too much clutter!
Prices are face to face, OKCGC this saturday is the next possibility
prefer not to ship, unless 1. shippings on you, 2. you want a few things, 3. cut me some slack on getting it shipped, Ill be as quick as I can.
I will go only off of private messages as far as commitments to buy
Left to right, top to bottom
Left to right, top to bottom
Ill have more in a day or sooner, or longer....
Prices are face to face, OKCGC this saturday is the next possibility
prefer not to ship, unless 1. shippings on you, 2. you want a few things, 3. cut me some slack on getting it shipped, Ill be as quick as I can.
I will go only off of private messages as far as commitments to buy
Left to right, top to bottom




Left to right, top to bottom
- New KKM bull barrel, .40 cal, c/p ramp $170
- Wilson 1911 trigger, new $15
- Rcbs handpriming tool, new $35
- Hornady Powder cop, new or like new, cant tell $25
Primary Arms red dot https://www.primaryarms.com/Primary_Arms_Micro_Dot_With_Fixed_Base_p/md-fbgii.htm $60SPF- Warne 34mm #222M high mount, matte, non QD, new $45
- Warne 30mm QD, #217L, new or like new, I cant tell $50
- Mag coupler mag grip, used exc. Cond. iots a hi-end coupler very nice, For usgi mags $15
- Set of core M&P grips. These are unobtanium, all three for $50
- Three stock 140mm sti mags, 45acp. A couple were lightly used to test fire, one appears unused. Back of spine lightly engraved “I, II, IIIâ€â€"assume they all need tuning . $130
- New MOE K grip $15
- Aggressively stippled moe magpul grip, used, w/screw $15
- CAA grip, exc. Condition w screw $10
- 250ct. nosler bthp 69gr .223 match bullets $45
100ct. Hornady 68gr .223 bthp $15SPF- Used Jard trigger, only thing I did was modify the head of a bolt for clearance, you can get one from lowes or Ace hwd. I think these are crap, but if you want to screw with this, have at it. $60. Tech support from me not included
- Colt Carry handle like new, a little witness mark paint $65
- Troy fixed front sight, cerakoted, with small diameter blade $35
- YHM picatinny riser moves rings, etc up ½†$25
- 2 sps 140mm mag tubes. These used to be the ticket for 21rds. Front weld is starting to split on these two. Otherwise like new. Got tig? Have at it $50 for both still available; someone cant count!
- .308 brake, looks like an old style, slim diameter miculek. 5/8â€x24 $20
- Blue anodized dawson ICE magwell. Used, but exc condition. $45
- BFB Nordic bolt releases for benellis $20 each (have two)
Three used-ass dawson 2011 +1 mag bases, have initials engraved on the bottom. Still work fine! These can be your H&H hit the concrete pads.. $50 for the threeSPFAnother 2011 DP +1 pad, much nicer shape $20SPF3 titanium grey M&P TTI basepads w springs. Shot two matches with these, excellent shape. These are the infamous “Jared Carpenter Head†numbering system. Only selling because Im uncomfortable dryfiring in the nude with these. $100 for the threeSPF- Original “clipdraw†for glocks Get this before Burk sees it $20
- KNS Push Button Quick Takedown Pin $10
- thrust button bracing device for AR handguard $40
- Carbine .ar15 handguard set w nut, delta ring, guards, and end cap $25
- used dpms .308 carbine ff tube, cerakoted fde used, $15
- used and super lightened dpms rifle length 308 tube , $30
- grips, free if you buy something
- carbine handguards , free if you buy something
- rifle handguards, free if you buy something
- new undrilled FSB, .750 has sight parts $25
- faux gas block from cmmg 22 upper. .750 Could be drilled for a gas port, I suppose, free if you buy something
- Plano case comes with a gun rest also. used and dusty, otherwise fine shape $15 http://www.midwayusa.com/Product/895002/plano-shooters-case-green-polycarbonate-camo
- 2 wire handgun racks for safe, each holds 6 $10 for both
- used surefire mag exc shape, only used it a couple times $70
- new in plastic 60rd SF mag $80
- Bullshooter handgun rest http://www.bullshootersightingin.com/pistol.htm$45
Ill have more in a day or sooner, or longer....