Sold/Expired Bullet ingots & hardening alloys or local sources for scavanging lead.

AMT7 · Mar 12, 2014

Attn bullet casters. We are in need of bullet ingots & hardening alloys or local sources for scavanging lead to make our own. Got some good info from Rotometals on how to do it right. Any tips will be very appreciated also. Thank You.

AMT7 · Mar 22, 2014

Will trade for equal value of Indoor range brass see link below in order of preference Linotype fluxed ingots or same high speed Babbit bearing, 60/40 lead solder non rosin core, Superhard 30% antimony / 70% lead, Lee type #2 or equiv, 99.9% tin ingots.

mike cyrwus · Mar 24, 2014

you did not just link to okshooters....

Matt1911 · Mar 24, 2014

Was that 2nd post in english?

jcameron996 · Mar 24, 2014

Matt Rigsby said:
Was that 2nd post in english?

I understood what he said, but bullet casters are just about as bad as everyone else. They don't trade they just accumulate.

AMT7 · Mar 25, 2014

Well cross posting in the tech community is not looked on so badly or used to not be for decades. But strangely on castboolits. 68forums, here and few other gun related sites its forbidden but really is self defeating in the long run. Some casters are, but some rotate on to other things and cull out the less favored stuff. I think its a narrow view and about $ and a false conception of control. My .02 cents worts.

Burk Cornelius · Mar 25, 2014

AMT7 said:
Well cross posting in the tech community is not looked on so badly or used to not be for decades. But strangely on castboolits. 68forums, here and few other gun related sites its forbidden but really is self defeating in the long run. Some casters are, but some rotate on to other things and cull out the less favored stuff. I think its a narrow view and about $ and a false conception of control. My .02 cents worts.

I dont know what any of this means, I just dont want you posting a link to OSA. Post anything you want, just no links to OSA