Accurate Iron Contact info

[Kevin Vrooman]

I have been trying to get ahold of Mike to find out on getting some work done with a M2 the email on his web site isnt valid. Does he have a phone and or good email to contact him?

http://accurateiron.nanotech9.com/index.php?id=main

Mike Cyrwus
[email protected]

Is the one listed on the web site but it doesnt work. Also he has no pricinf or even mentions M2 work on the web site. Do I have to coorect page?

 

[Kevin Vrooman]

Also I have not purchased the Benelli M2 I am going to go look at a 26" field model today with adding 10+1 how will that tube line up with the barrel same length or will the tube come past it or be shortter?

I just figured with a tube that long might as well get a barrel close to the same length. ( plus its the only one they have in stock besides a tatical model)


Edit: Looks like a +7 nordic tube ( for a total of 10+1) just barrel sticks out past a 26" barrel looks like that is the way I want to go.

 

[JustSayWhen]

Benelli SBE 26" barrel with Nordic Components +7 tube (there is an extended choke on there as well). They look and feel so nice and they are surprisingly light.

 

[jhjh11]

On a 26 it's shorter than the barrel

 

[Matt1911]

Negative Hensey. The Nordic tube sticks out about an inch past the barrel.

 

[Matt1911]

as far as getting hold of Mike you can PM him on here or do like I do and send pigeons with note attached to their legs

 

[Kevin Vrooman]

Well buying the shotgun now. 1199 not a great price but fair. Can't seem to find one used. Plus I get cabelas points damn that store and its points.

 

[jhjh11]

Really 10 + 1 oh I was thinking 9 + 1

 

[jtischauser]

I passed this thread along to Mike so he would see it.

 

[Kevin Vrooman]

So while I am waiting to hear back from Mike is there anything I can do to it now, Like order extension tube or anything like that or should I just wait and have him do it all?

Went and test fired it the other day and checked the factory chokes and the patterns I got with them, Also I was suprised at how hard it was to load lot of tension on the spring.

 

[jtischauser]

Mike has all the stuff u need.

 

[Kevin Vrooman]

Mine has all the stuff u need.

Its for sale or something?

 

[Matt1911]

Makereadyproshop.com has the parts you need.

 

[Kevin Vrooman]

My question was more if I am sending the gun to mike should I even bother ordering any of the add on stuff or just have him do it all( Nordic tube, bolt handle, bolt release button etc) some of the "bolt on" things

 

[jtischauser]

If you buy the stuff from Mike its cheaper in his package.

 

[jtischauser]

Its for sale or something?

I meant Mike has all the parts you need.

 

[Kevin Vrooman]

I meant Mike has all the parts you need.

Ahh ok I went searching for it in the clasfied section seen your 20 guage lol

 

[RigPig]

What's a ballpark figure for what it would cost for the Accurate Iron package, and what all do they do? I have a 26" M2 field that I'm looking to convert over to a 3gun shotty. I've got the Nordic +7 extension on it from JBO, and factory synthetic furniture inbound from Benelli. I figured I'd set this gun up right the first time. I'm running a FNH SLP MKI right now.

 

[jtischauser]

What's a ballpark figure for what it would cost for the Accurate Iron package, and what all do they do? I have a 26" M2 field that I'm looking to convert over to a 3gun shotty. I've got the Nordic +7 extension on it from JBO, and factory synthetic furniture inbound from Benelli. I figured I'd set this gun up right the first time. I'm running a FNH SLP MKI right now.

Guesstimate would be $800 for all the add ons and machine time and labor and stickers. If you got the tube take some off of that. That's the full meal deal with a toy and a balloon. You can do less but you might as well jump head first into the ball pit.
Trick is getting in the queue. Mikes busy and isn't always taking new customers.

 

[RigPig]

What do you get for $800 I guess is what I'm asking?