3 Gun at OKC Gun Club Saturday Feb. 23rd

Status
Not open for further replies.
TacticalK9 said:
Imgoing to have to find some .223 and quick! Something is wrong with my lee dies and the neck isnt holding the bullet very tight
Sounds like you need to adjust the sizing die down closer to the shell plate. Doing this will enable the die to resize the neck properly.
 
TacticalK9 said:
i thought i solved it today. the interior diameter of the cases are .214-.216 after resizing. I charge by hand then seat the bullet and i can still push the bullet into the case with little effort.

I dont know when my crimp die will come in from midway. Its due back in stock the 28th. so ill be on the hunt for factory ammo.
is your sizing die touching the shellplate?
 
try turning in your seating die a bit, it's got a built in crimp.
Then you can back out the depth plunger to the desired OAL
 
mike_pinto said:
A little birdie told me although the round counts are going to be low, better bring your front sight. :)
And slugs.
I will have more beer can shims for your front sight.
 
Will chamber flags be available for purchase out at the range? I have looked all over town and everyone is sold out...

101
 
101ABN327 said:
Will chamber flags be available for purchase out at the range? I have looked all over town and everyone is sold out...

101
Oh great now there is a run on chamber flags too? When will the madness end.
 
Feegee Matlock said:
Due to my surgery this Thursday I have a whole 3 gun set up some one could borrow if they need it.
Sent from Feegee's iPhone using Tapatalk
If somebody takes you up on this, let me know and I'll run by your place Friday afternoon to grab your gear and get it back to you Saturday.
 
Well, Feegee(Puppy Love :-)...you can watch my kids then, and I can go shoot and tell you how it was....


damn the bad luck, I'm out again due to cub scout scheduling...I'm beginning to think they are against me!
 
Status
Not open for further replies.
Back
Top