dennishoddy
Moderator
Correct. I should have mentioned that.
1st AR
- Thread starter AKAKBroncho
- Start date
Dieseltech09
Well-Known Fanatic
I want to build a 270 on a AR10 platform
AKAKBroncho
Fanatic
Couple more basic questions if you don't mind:
1: Should I get a 1:9 or 1:7 twist barrel? I'd like to be able to do a lot of plinking with a 55 gr bullet as they seem to be the most common, but shoot something a little larger for hunting.
2: what are a couple of good brands or rounds that are reasonably priced and aren't hard on the gun?
1: Should I get a 1:9 or 1:7 twist barrel? I'd like to be able to do a lot of plinking with a 55 gr bullet as they seem to be the most common, but shoot something a little larger for hunting.
2: what are a couple of good brands or rounds that are reasonably priced and aren't hard on the gun?
dennishoddy
Moderator
Can't help you on brands, as I reload, and pretty much stay with 55 grain, 1-9 twist for hunting and shooting. Exception being some Rem 45 grain HP's that I bought during the obama scare. I'm reserving them for a future P-dog hunt.
Shoot low Luke
New Fanatic
I too am building my first ar. I have a question for the more knowledgeable. I am building a 6.5 grendel/sporter. The question is where can i get magazines for this caliber?
drmitchgibson
The white Morgan Freeman
I believe you can use AR mags for 6.5 Grendel.
Dieseltech09
Well-Known Fanatic
Try Model 1 sales. They have 10 and 25 rd C-products mags. Also Midway or Brownells should have them
jtischauser
I'm addicted to kicking ass
I have a couple Stag Arms Model 3G's. You're welcome to shoot them anytime you like.
If you buy that Stag use this discount code fo r5% off. JT0608
On a side note Stag has announced that they are going to build a .308 based onteh AR platform next year.
If you buy that Stag use this discount code fo r5% off. JT0608
On a side note Stag has announced that they are going to build a .308 based onteh AR platform next year.
AKAKBroncho
Fanatic
Who should I go to for purchase of a Stag? I emailed their customer service but wasn't super pleased with the response. Any good dealers in Edmond or OKC metro?
StealthESW
Well-Known Fanatic
You could check out Cold Hand Arms. Steve has some good options in his store and probably just about any questions you have. I know H&H has a very large selection of brands and calibers of ARs.
Personally, I like Cold Hand Arms, better atmosphere and the prices seem to be better. I have built three ARs so far and they are the first ones I have ever had. It is not very hard as long as you identify what goes where. The hardest part is not scratching the receiver. It only takes a few mins to assemble.
Personally, I like Cold Hand Arms, better atmosphere and the prices seem to be better. I have built three ARs so far and they are the first ones I have ever had. It is not very hard as long as you identify what goes where. The hardest part is not scratching the receiver. It only takes a few mins to assemble.
Dieseltech09
Well-Known Fanatic
I think you can order online and have it shipped to Steve at CHA.
Jrabbit771
Well-Known Fanatic
Stag Model 2 was my first one....Then like they said.....I've been addicted every since....bought my second one a couple months ago.
I would of been intimidated building my first one because I knew about the AR type firearms. I would of been lost. There is SO many options out there. But...I plan on building my 3rd one. I'm sure I will need a lot of Boomer Shooter input when I start on it.
You won't be disappointed with the Stag and they carry a lifetime warranty. Stag Arms customer service is top notch.
I would of been intimidated building my first one because I knew about the AR type firearms. I would of been lost. There is SO many options out there. But...I plan on building my 3rd one. I'm sure I will need a lot of Boomer Shooter input when I start on it.
You won't be disappointed with the Stag and they carry a lifetime warranty. Stag Arms customer service is top notch.
jtischauser
I'm addicted to kicking ass
Here is a dealer locator. Not sure who stocks them as the ones that came up had several that definitely don't.
http://209.113.204.58/phpDealerLocator_4_6/
I would check out Bud's Gun Shop and ship it to Cold Hand Arms for the transfer.
http://209.113.204.58/phpDealerLocator_4_6/
I would check out Bud's Gun Shop and ship it to Cold Hand Arms for the transfer.
aestus
Well-Known Fanatic
Shameless self promotion for the Loki complete uppers group buy, but if you're still interested in building an AR, this may be a good option. http://www.boomershooter.com/forums/index.php?/topic/4970-loki-complete-upper-group-buy/
gmar
Well-Known Fanatic
That's the route I took but after building my current AR, I wish I would have built my first one the way I wanted it. I would have saved some money however, I did learn A LOT by changing out parts and shooting that first AR and I probably wouldn't have known what exactly I wanted without buying that rifle off the rack.
gmar
Well-Known Fanatic
I would 2nd Stee at CHA. He's a good guy with good prices and will help you out if you get stuck with the build.
