Scott Hearn
Well-Known Fanatic
Decided to drink some blue koolaid. So here it is.
Complete Hornady LNL AP press. This is an auto indexing 5 station progressive press. I have the following:
The LNL AP press complete with case activated powder measure. Has been converted to EZ-Ject and it works great. Comes with original manual.
Brand new Case Feeder assembly that has loaded about 700 rounds of 9mm total. It will come packed in original box with original manual etc.
Small pistol case feed plate
Large pistol case feed plate
Small Rifle case feed plate
(18) LNL die bushings (maybe a couple more if so I'll throw them in)
(4) Quick change powder dies
#16 Shell plate (.223/.380)
#8 Shell plate (9mm/38 Super)
#6 Shell plate (.38/.357/6.5 Grendel) This one was use one whole time!
#10 Shell Plate (.40SW/10mm/.357 Sig) This one has never even been used ever!
#1 Shell Plate (.45ACP/.308Win/.243Win)
9mm PTX expander (for "powder though" case expansion)
.45 PTX expander
Rifle micrometer powder metering assy.
Pistol powder metering assy.
Assorted extra small parts like case retention springs a new primer seating assembly and whatever else I find.
No dies are included but that's ALL you need to load .38/357; .223; .308; 6.5 Grendel; .40/10mm/.357Sig; .45ACP and many others (the shell plates cover a bunch of calibers each. I didn't list them all here). Just add your dies and you are set.
Everything is in great shape and works just as it should. For some reason I can get a bit more speed out of the "blue" ones. That's the only reason I'm selling it. Nothing wrong with the press as it's actually somewhat better than what I'm replacing it with as to features. It's just me, I'm weird I guess.
All this new will run around $1135 without shipping. You can have the whole thing for $925. FTF in Moore or if you are in the OKC area I'll even deliver and help you set it up.
Complete Hornady LNL AP press. This is an auto indexing 5 station progressive press. I have the following:
The LNL AP press complete with case activated powder measure. Has been converted to EZ-Ject and it works great. Comes with original manual.
Brand new Case Feeder assembly that has loaded about 700 rounds of 9mm total. It will come packed in original box with original manual etc.
Small pistol case feed plate
Large pistol case feed plate
Small Rifle case feed plate
(18) LNL die bushings (maybe a couple more if so I'll throw them in)
(4) Quick change powder dies
#16 Shell plate (.223/.380)
#8 Shell plate (9mm/38 Super)
#6 Shell plate (.38/.357/6.5 Grendel) This one was use one whole time!
#10 Shell Plate (.40SW/10mm/.357 Sig) This one has never even been used ever!
#1 Shell Plate (.45ACP/.308Win/.243Win)
9mm PTX expander (for "powder though" case expansion)
.45 PTX expander
Rifle micrometer powder metering assy.
Pistol powder metering assy.
Assorted extra small parts like case retention springs a new primer seating assembly and whatever else I find.
No dies are included but that's ALL you need to load .38/357; .223; .308; 6.5 Grendel; .40/10mm/.357Sig; .45ACP and many others (the shell plates cover a bunch of calibers each. I didn't list them all here). Just add your dies and you are set.
Everything is in great shape and works just as it should. For some reason I can get a bit more speed out of the "blue" ones. That's the only reason I'm selling it. Nothing wrong with the press as it's actually somewhat better than what I'm replacing it with as to features. It's just me, I'm weird I guess.
All this new will run around $1135 without shipping. You can have the whole thing for $925. FTF in Moore or if you are in the OKC area I'll even deliver and help you set it up.
