Scott Hearn
Well-Known Fanatic
Okay boys and girls. I've heard a lot of talk about folks wanting to shoot revo division. Here's your gun just in time for Christmas!
S&W model 625-8 Jerry Miculek signature model. It has a 4" barrel, tuned and very light action with a radically bobbed hammer which allows tuning a lot lighter than just a normal trigger job, heavily chamfered and polished cylinder chambers for fast reloads, a Cylinder & Slide extended firing pin and an SDM aftermarket fibre optic front sight. Also comes with a Triple Crown kydex holster that fits like a glove. This gun has a Wilson 13lb rebound spring with about 1.5 coils removed, a tuned mainspring and shortened strain screw. The trigger return is good and you could probably shorten the strain screw a bit more. It is set to fire Federal primers PLUS about 3/4 of a turn so you could reduce main spring tension a bit more than it is now and it's already light. I have fired CCI Blazer factory loads in a match and they fired just fine (I ran out of my match ammo due to a reshoot). I got the gun used and it had already been tuned some and I worked on it some more. All the cheesy lock parts are where they belong. The trash! Also I have removed the hammer block but I can provide it if you want it. This was a competition only gun for me so all the PC, unnecessary, lawyer mandated parts came out. Round count is about 2500, so it's barely broken in. I may even have the original JM grips somewhere, if I can find them they go with it too, but no guarantee. Only selling it because I bought another one with a 5" barrel.
Price is $700 FTF in Moore/Norman/South OKC area.
Edit: I found the grips (not a scratch on them) and the factory case w/all factory paperwork.
S&W model 625-8 Jerry Miculek signature model. It has a 4" barrel, tuned and very light action with a radically bobbed hammer which allows tuning a lot lighter than just a normal trigger job, heavily chamfered and polished cylinder chambers for fast reloads, a Cylinder & Slide extended firing pin and an SDM aftermarket fibre optic front sight. Also comes with a Triple Crown kydex holster that fits like a glove. This gun has a Wilson 13lb rebound spring with about 1.5 coils removed, a tuned mainspring and shortened strain screw. The trigger return is good and you could probably shorten the strain screw a bit more. It is set to fire Federal primers PLUS about 3/4 of a turn so you could reduce main spring tension a bit more than it is now and it's already light. I have fired CCI Blazer factory loads in a match and they fired just fine (I ran out of my match ammo due to a reshoot). I got the gun used and it had already been tuned some and I worked on it some more. All the cheesy lock parts are where they belong. The trash! Also I have removed the hammer block but I can provide it if you want it. This was a competition only gun for me so all the PC, unnecessary, lawyer mandated parts came out. Round count is about 2500, so it's barely broken in.
Price is $700 FTF in Moore/Norman/South OKC area.
Edit: I found the grips (not a scratch on them) and the factory case w/all factory paperwork.
