boomer mooner
Well-Known Fanatic
I have a CZ 75B SA I bought new a few years back I would like to sell. Don't know the round count but it's a long way from worn out. Sent it to the CZ Custom shop because I thought I was going to use it for 3-gun. That was 2 years ago and I've been to two shoots since I got it back.
At the CZ Custom shop Stuart Wong worked on it and did the following:
Action Job - installed competition hammer, lighter hammer spring, polished sear, hammer strut, ejector housing, trigger bar and refit safety.
Fit SAO trigger and adjusted pretravel and over travel, replaced trigger pin. (Note: this was already SAO, but the factory SA trigger only offered overtravel adjustments).
Reliability work to include beveled breech face, polished center rail, polish extractor, polish barrel ramp.
Also had the firing pin block removed, so the B in 75B isn't really true any more.
Trigger was breaking at 2.5# at the custom shop and may be lighter now, but I don't have a trigger scale.
I also added a FO front sight and VZ grips (the original plastic grips and a set of Hogue rubber wraparound grips will be included).
I need to $700 for the pistol with the two extra sets of grips, the two factory 16 rd mags plus two more 16 rd Mecgar grips, Bladetech tech-loc BOC holster, Comp Tac paddle holster (missing one screw), two unopened calibration packs from Wolff, one for reduced power and one for extra power and 20#, 24# and 26# hammer springs, also unopened. I also have a 22# hammer spring that's installed because my .22 kadet conversion kit wouldn't fire reliably after the custom work. Works like a champ now, plus I have the hammer spring that I took out. Also included is the original box and contents from the original purchase.
For an extra $80 I have four MecGar 17 round mags, one of which I installed a base pad from Hennings and a Grams magazine spring kit that takes the capacity to 23 rounds.
For an extra $350 I have a kadet .22 conversion kit with the two original mags plus two more. Original box and literature also included.
At the CZ Custom shop Stuart Wong worked on it and did the following:
Action Job - installed competition hammer, lighter hammer spring, polished sear, hammer strut, ejector housing, trigger bar and refit safety.
Fit SAO trigger and adjusted pretravel and over travel, replaced trigger pin. (Note: this was already SAO, but the factory SA trigger only offered overtravel adjustments).
Reliability work to include beveled breech face, polished center rail, polish extractor, polish barrel ramp.
Also had the firing pin block removed, so the B in 75B isn't really true any more.
Trigger was breaking at 2.5# at the custom shop and may be lighter now, but I don't have a trigger scale.
I also added a FO front sight and VZ grips (the original plastic grips and a set of Hogue rubber wraparound grips will be included).
I need to $700 for the pistol with the two extra sets of grips, the two factory 16 rd mags plus two more 16 rd Mecgar grips, Bladetech tech-loc BOC holster, Comp Tac paddle holster (missing one screw), two unopened calibration packs from Wolff, one for reduced power and one for extra power and 20#, 24# and 26# hammer springs, also unopened. I also have a 22# hammer spring that's installed because my .22 kadet conversion kit wouldn't fire reliably after the custom work. Works like a champ now, plus I have the hammer spring that I took out. Also included is the original box and contents from the original purchase.
For an extra $80 I have four MecGar 17 round mags, one of which I installed a base pad from Hennings and a Grams magazine spring kit that takes the capacity to 23 rounds.
For an extra $350 I have a kadet .22 conversion kit with the two original mags plus two more. Original box and literature also included.
